Overview
The Crown Automotive J8128147 is a front wheel spindle that includes the inner bearing and seals. It fits the CJ5, CJ7 and Scrambler.
The spindle is the stub on which the front wheel bearings and hub ride.
The spindle is part of a Jeep replacement range that includes many factory-discontinued items.
Key features
- Front wheel spindle
- Includes inner bearing and seals
- Direct fit from Crown.
- Fits the CJ5, CJ7 and Scrambler
Spindle wear and bearing fit
The spindle carries the wheel bearings and holds the hub in position on the axle. Because it takes steering and braking loads, the shaft and the threads where the nut seats are worth examining whenever the hub is off. Scoring, grooves or a bent section usually mean a bearing has been running loose.
Bearing preload is set at the spindle, so a replacement should be installed with clean surfaces and correct torque on the retaining nut. Many owners replace the outer bearing, seal and hub when the spindle is changed, because those parts wear against the same surfaces. Use fresh grease and check for play after the first drive.
- Grooves or scoring on the bearing surface
- Thread damage where the nut seats
- Play in the hub after the nut is set
- Worn inner seal letting grease into the brake area
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J8128147 |
| UPC | 848399069600 |
| _pn | J8128147 |
| Part type | Front wheel spindle |
| Includes | Inner bearing and seals |
| Fit type | Direct fit (Crown) |
Confirm the axle type and compare the spindle with your old one before installing it.
Vehicle fitment
The J8128147 fits three model lines from 1977 to 1986.
The manufacturer fitment list for part J8128147 covers: 1977–1983 Jeep CJ5; 1977–1986 Jeep CJ7; 1981–1985 Jeep Scrambler.
Not listed: models before 1977 and the Wrangler. Confirm your vehicle’s year, model and trim before ordering.
What’s included
- Front wheel spindle
- Inner bearing
- Seals









