Overview
The Omix-ADA 16529.06 is a Dana 30 front spindle for drum brakes only. It fits the CJ5, CJ6 and CJ7.
The spindle carries the front wheel bearings.
The spindle is made to original Jeep specifications, with a five-year limited warranty.
Key features
- Dana 30 front spindle
- For drum brakes only
- Direct fit.
- Fits CJ5, CJ6 and CJ7 models.
Spindle and bearing fit
The spindle carries the front wheel bearings and holds the hub in place, so its condition sets how smoothly the wheel turns. On a drum brake axle the backing plate and hub sit on the spindle, which means worn bearing seats or a bent spindle will show up as a wobble or a hum at speed. Checking the bearing seats before a rebuild saves time later.
When fitting a new spindle, clean the knuckle bore and confirm the bearing seats are smooth before pressing parts on. Use new bearings and seals where the old ones are worn, and set the bearing preload to the procedure for the vehicle. A spindle replacement is also a good time to check the brake shoes, drum and wheel cylinders.
- Clean the knuckle bore before fitting
- Check the bearing seats for scoring or wear
- Replace worn bearings and seals together
- Inspect the drum brake parts during the same job
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16529.06 |
| UPC | 804314039899 |
| _pn | 16529.06 |
| Part type | Front spindle |
| Axle | Dana 30 |
| Brakes | Drum only |
| Position | Front |
| Fit type | Direct fit (Omix-ADA) |
Check the spindle finish and dimensions against the old spindle before fitting it.
Vehicle fitment
It fits 1972–1977 Jeep CJ5, 1972–1975 CJ6 and 1976–1977 CJ7 models. Confirm fit for your vehicle’s year, model and trim before ordering.
The manufacturer fitment list for part 16529.06 covers: 1972–1977 Jeep CJ5; 1972–1975 Jeep CJ6; 1976–1977 Jeep CJ7.
Not listed: models after 1977 and the Wrangler. Confirm your vehicle’s year, model and trim before ordering.
What’s included
- One Dana 30 front spindle









