Overview
The Dana Spicer Front Axle Shaft for the Dana 44, part 27902-53X, is an OE-style replacement shaft for the driver side inner position of a front Dana 44 axle.
It is an OE-style replacement built for popular factory applications, matching the type fitted to vehicles from the factory. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Driver side inner shaft
- 30 spline
- Front Dana 44 position
- OE-style replacement
Before you buy
Axle shafts carry torque from the differential to the wheel hub, so the inner end has to seat correctly in the differential side gear and the spline count has to match the carrier. Shafts are rarely swapped alone; the bearings and the seal at the hub are usually inspected during the same job.
When the old shaft is out, look at the axle seal, the hub bearings and the retainer for leaks, play or heat marks. Clean the differential side gear splines before fitting the new shaft, and check the splines on both ends for wear. A worn spline can slip under load, so a new shaft fitted to a worn gear rarely lasts long.
- Check the spline count on the carrier before ordering
- Inspect the axle seal and hub bearings at the same time
- Clean the side gear splines before installation
- Expect the shaft to come out from the differential end
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 27902-53X |
| Axle location | Front |
| Axle type | Dana 44 |
| Shaft location | Driver side inner |
| Axle spline | 30 |
| Manufacturer | Dana |
Vehicle fitment
Universal fit is shown, but shafts depend on the axle type and spline count. Match the front Dana 44 and the 30 spline end to your axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Inner shafts come out from the differential end, so check the removal method for your axle before starting the job.
What’s included
One driver side inner axle shaft.









