Overview
It is a Dana 30 front left axle shaft with 27 splines, for the Dana 30 JK axle. It fits 2007–2018 Jeep Wrangler (JK) models in 2-door and 4-door trims.
The shaft has a 1350 series U-joint, larger than the 1310 factory joint, which suits owners running bigger tires. The outer stub is re-engineered with improved snap retention for higher shock loads, and material is moved to the yoke ears to reduce bearing cap spinning.
Key features
- Front left position
- 1350 series U-joint, up from the 1310 factory size
- Re-engineered outer stub with improved snap retention
- Added material in the yoke ears to reduce bearing cap spinning
- 27 splines
Shaft joint wear and inspection
Axle shafts carry torque through the joints at each end, so wear at the U-joint or outer stub shows up as play, clunking or vibration. Joint wear grows faster under heavy throttle, large tires and hard off-road use. A new shaft is a good chance to check the bearing cap, hub seal and yoke for wear as well.
When inspecting an old shaft, grip the yoke and rock it to feel for play at the joint. Look for rust staining, dried grease or a loose strap around the joint. Torque the strap and bearing cap bolts to the value in your service procedure and recheck them after the first trail runs.
- Feel for play at the U-joint by rocking the yoke
- Look for rust staining or dried grease at the joint
- Recheck the bearing cap bolts after the first trail runs
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 2014616-1 |
| Axle maker | Dana |
| Axle location | Front |
| Position | Front left |
| Axle type | Dana 30 JK |
| Axle spline | 27 splines |
| Differential | None included |
| U-joint | 1350 series |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler (JK) in 2-door and 4-door models, including the 70th Anniversary, 75th Anniversary, Sahara, Sport, Sport S and X trims and their Unlimited versions.
Material is added to the yoke ears and removed from the body to balance deflection through the yoke, which reduces bearing cap spinning.
Compare the 27 splines and the front left position with the shaft being replaced before fitting.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
It is one front left axle shaft assembly, with no differential included.
Not included: A differential.









