Overview
The Warn 32721 is a manual hub spindle nut kit for front axles, fitting Dana 50 and Dana 60 axle types. It is a 30 spline kit and a universal fit kit. Confirm your axle type and spline count before buying.
Key features
- Manual hub spindle nut kit
- 30 spline
- Front axle location
- Dana 50 and Dana 60 axle types listed
Locking hub basics
Manual locking hubs let you disconnect the front wheels from the axle so the front driveshaft does not turn when the vehicle is in two-wheel drive. The spindle nut holds the hub to the spindle and sets the bearing preload, so its fit affects both smoothness and wear. A loose or over-tight nut can make the hub feel rough or noisy.
When servicing a hub, clean the threads and check the spindle for wear or rust before installing the nut. Use the adjustment process appropriate to your axle and repack the bearings with fresh grease. Replace gaskets and seals that show damage, and recheck the hub after the first few drives, since settling can change the adjustment. Keep the hub clean and dry, because water and grit that get inside can shorten its life.
Specifications
| Brand | Warn |
|---|---|
| Product number | 32721 |
| UPC | 12748327219 |
| Component | Manual hub spindle nut kit |
| Spline | 30 spline |
| Axle location | Front |
| Axle type | Dana 50, Dana 60 |
Vehicle fitment
It is built around the front Dana 50 and Dana 60 axle types, and it is a universal fit kit. Check the year, model and trim of your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
It is a manual hub spindle nut kit. Compare the package contents with your installation steps before starting.









