Overview
The Dana Spicer 32349 is an inner pinion bearing baffle for front Dana 30 Reverse axles. It is designed for high pinion axles and highly rotated axles, where oil collecting behind the inner pinion bearing feeds the outer pinion bearing.
Key features
- Specialty baffle for the inner pinion bearing area
- Supports oiling of the outer pinion bearing
- Designed for high pinion and highly rotated axles
- Front axle location
Before you install
The inner pinion bearing sits close to the carrier, where oil is thrown around by the ring gear and pinion. A baffle in this area directs that oil toward the outer pinion bearing, which can run short of lubricant on high pinion and highly rotated setups. Oil flow matters more as the gear mesh changes under load, so a correctly placed baffle helps keep the outer bearing protected.
Before fitting a baffle, check the housing for old debris, cracks and any sludge that could block oil passages. Confirm the pinion preload and bearing condition, because a loose or worn bearing can make a good baffle ineffective. Use fresh gear oil at the correct level once the work is finished, and check for leaks after the first drive.
- Clean the housing and oil passages
- Check pinion bearing play before reassembly
- Fill with fresh gear oil to the correct level
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 32349 |
| UPC | 70000006727 |
| Axle location | Front |
| Axle type | Dana 30 Reverse |
| Fitment | Universal fit |
Vehicle fitment
No vehicle is named. The baffle is universal fit for front Dana 30 Reverse axles.
Axle type is not a vehicle model, so check your axle before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The baffle is fitted in the inner pinion area, so the work needs an axle shop with differential experience.
What’s included
The item is the baffle only.
Not included: Bearings and carrier parts, so check you have them before starting.











