Select your vehicle

Pinion Seal

Dana Spicer

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Dana Spicer pinion seal, part number 2009802
  • UPC 23913137137
  • Universal and direct fit; no vehicle or axle model named

Description

Overview

The Dana Spicer 2009802 is a pinion seal sold as a universal and direct fit part. No vehicle or axle model is named, so compare the seal with your existing one before ordering.

Dana describes its drivetrain components as engineered to the same standards it delivers to OE manufacturers, and the parts are put through rigorous testing.

Key features

  • Pinion seal for the pinion shaft
  • Universal fit and direct fit
  • Dana Spicer brand

Choosing a replacement seal

A pinion seal sits where the pinion shaft enters the differential housing. Its job is to hold gear oil inside while the shaft turns, and it is one of the more common leak points on a solid front or rear axle. Leaks usually show up as oil on the inside of the axle cover or on the driveshaft yoke. A seal that has started to weep is a good time to inspect the pinion bearings before the leak gets worse.

When choosing a replacement, match the seal to the pinion diameter and the lip style of the old seal, since a near match can still seep. Pulling the yoke usually means replacing the pinion nut and crush sleeve as well, because the old sleeve cannot be reused for setting preload. Keep the axle clean, use fresh gear oil at the correct level, and recheck for leaks after the first few drives.

  • Pinion nut and crush sleeve
  • Fresh gear oil at the correct level
  • Yoke sealing surface free of grooves

Specifications

Brand Dana Spicer
Part number 2009802
UPC 23913137137
Fitment Universal fit; Direct fit

Vehicle fitment

No vehicle, axle model or year is named for this seal.

Without a named axle model, compare your old seal with the new one before fitting it. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Pinion seal work involves pinion yoke removal and bearing preload checks, which is best left to an experienced axle technician.

What’s included

The package contains one pinion seal.

Not included: Check the package contents against your installation before starting, including the yoke, bearings and gear oil.

Specification

Shipping weight 0.25 lbs
Package dimensions 3.50 × 3.50 × 1.30 in
brands

Questions & Answers

What is part number 2009802?

It is a Dana Spicer pinion seal with part number 2009802 and UPC 23913137137. No vehicle or axle model is named, so confirm the fit before ordering.

Does this pinion seal fit my vehicle?

It is universal fit and direct fit, but no vehicle, axle model or year is named. Confirm your vehicle's year, model and trim before ordering, and compare the new seal with your old one.

Is this seal a complete kit?

The item is a single pinion seal. Check the package contents against your installation before starting, since a yoke, bearings, gear oil and hardware may be needed.

How can I tell the pinion seal needs replacing?

Oil on the inside of the axle cover or around the yoke is the usual sign. Check the pinion shaft for play and inspect the bearings before reinstalling, since a worn bearing can push oil past a new seal.

Should the pinion yoke be replaced with the seal?

Only if the yoke shows grooves or wear under the seal lip. Smooth, undamaged yokes can usually be reused, but inspect the sealing surface closely before reassembly.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon