Overview
The Dana Spicer pinion seal fits Dana 60 axles in front or rear positions. A pinion seal keeps gear oil inside the differential where the pinion shaft exits the housing.
Replacing it restores the seal at the pinion, which helps keep gear oil from leaking out of the axle.
Key features
- Pinion seal for Dana 60 axles
- Fits front or rear positions
- Universal fit by axle type
Signs the seal is worn
A pinion seal wears through lip contact with the pinion yoke, so the first sign is usually a small oil seep at the back of the yoke. Oil that builds up on the housing, brake backing plates or the inside of the wheel is a clue that the seal is letting go. Ignore it for long and the gear oil level can drop below safe levels.
When the seal is replaced, the pinion yoke should also be inspected for grooving at the seal surface, since a worn yoke can cut into a new seal. Pinion preload and bearing condition matter too, so check for play before reassembly. Use fresh gear oil at the correct level once the job is complete.
- Look for oil at the rear of the pinion yoke
- Inspect the yoke for grooves at the seal surface
- Check pinion preload and bearing play
- Refill with fresh gear oil to the correct level
Specifications
| Brand | Dana Spicer |
|---|---|
| UPC | 23913141158 |
| Axle type | Dana 60 |
| Axle location | Front or rear |
| Fitment | Universal fit |
Vehicle fitment
No vehicle is named for this pinion seal. It is identified by axle type, Dana 60, in front or rear positions. Axle type is not a vehicle model, so confirm the axle under your vehicle before ordering. Confirm your axle type and trim before ordering.
Axle type is not a vehicle model, so confirm the axle under your vehicle before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing a pinion seal means working on the pinion yoke and pinion preload, so a shop experienced with axle work is the safer choice.
What’s included
Compare the package contents with your installation plan before starting work.
Not included: the pinion yoke, bearings and gear oil, which may need to be sourced separately.









