Overview
The Dana Spicer 42778 is a small pinion seal slinger for Dana 35 axles, named for both front and rear axle locations. It limits how much oil travels to the pinion seal, which helps prevent pinion seal leaks.
The part is sorted by axle type rather than by vehicle, so verify your axle is a Dana 35 before fitting one.
Key features
- Small design for the pinion seal area
- Limits the oil that reaches the pinion seal
- Designed to help prevent pinion seal leaks
- Front and rear axle locations listed
Why the slinger matters
A pinion seal slinger sits just ahead of the seal and throws away oil that would otherwise reach the lip. Less oil at the seal means less pressure and less chance of a weep, especially on axles that run warm or carry heavy loads. Because it works with the seal rather than replacing it, the slinger is most useful when the seal and its surroundings are in good shape.
When inspecting one, look for bent edges, grooves or debris that would stop it from sitting flat. Clean away old gear oil and sludge so the slinger seats properly on the yoke or shaft. If the seal has already leaked, replace the seal first and then confirm the slinger is in place, since a damaged slinger can throw oil in the wrong direction.
- Check for bent or grooved edges
- Clean old gear oil from the seal area
- Confirm the slinger sits flat
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 42778 |
| UPC | 70000007766 |
| Type | Pinion seal slinger |
| Axle location | Front and Rear |
| Axle type | Dana 35 |
| Fitment basis | Universal fit by axle type |
Vehicle fitment
The Dana 35 axle is the only axle type named, in front or rear locations. No vehicle years or models are given for this slinger.
Confirm your vehicle’s year, model and trim before ordering, and check that your axle is a Dana 35.
What’s included
Confirm the box contents against your installation before you start.









