Overview
The Lube Locker LLR-D080 is a Dana 80 differential cover gasket that installs dry, without silicone sealant, replacing RTV silicone on the cover. That avoids the mess and set-up time sealant brings.
Use it when the cover on a Dana 80 axle is removed and reinstalled. Lube Locker markets the gasket as universal fit, but it is sized for the Dana 80 cover, so match the gasket to your axle before ordering.
Key features
- Steel core with a rubber coating
- Full perimeter elastomer beading on both sides, which Lube Locker says resists splitting and extrusion during installation
- Dry installation with no sealant required and no set-up time
- Lube Locker describes its torque retention as superior
Preparing the cover surface
Dry-install gaskets depend on a clean, flat cover and housing face. Remove old gasket material with a plastic scraper rather than a metal tool, which can gouge the sealing surface. Wipe the flange with a clean solvent and let it dry before setting the gasket in place. A few minutes of prep here prevents most leaks on a Dana 80 cover.
Steel-core gaskets with rubber coating take up minor surface variation, but they still need even bolt clamping. Tighten the cover bolts in a crossing pattern in stages rather than all at once. Heavy-duty axles see more load, so a loose cover can work and weep over time. Check the cover after a short drive and again after the first few heat cycles.
- Use a plastic scraper on the flange
- Tighten bolts in stages, crossing the pattern
- Recheck the bolts after the first drive
Specifications
| Brand | Lube Locker |
|---|---|
| Part number | LLR-D080 |
| UPC | 859167006208 |
| Axle type | Dana 80 |
| Gasket core | Steel with rubber coating |
| Bead | Full perimeter elastomer on both sides |
Vehicle fitment
Lube Locker labels this gasket universal fit, but it is made for the Dana 80 differential cover. The axle type is the fitment detail to check, since no vehicle model or years are given.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lube Locker says installation is dry, with no sealant needed and no set-up time before the cover goes back on.
What’s included
The gasket is sold as a differential cover gasket. Count the gasket and any fasteners you need before you start the job.









