Overview
The Lube Locker Chrysler 9.25 inch differential cover gasket, part number LULLLR-C925, is a steel core gasket with a rubber coating for front Chrysler 9.25-inch axles. Lube Locker designed it to seal a differential cover without RTV silicone or a hammer to break the cover free.
The gasket has a full perimeter elastomer bead on both sides. The bead keeps it from splitting or extruding during installation and helps it hold torque. Installation is dry, so there is no sealant to set up and no silicone to clean up.
Key features
- Steel core with a rubber-coated surface
- Full perimeter elastomer beading on both sides
- Dry installation, with no sealant required
- No set-up time before the cover can be torqued
Sealing a differential cover
A differential cover seals gear oil inside the axle housing, so the mating surfaces must be clean and flat before a new gasket goes on. Old gasket material, dried gear oil and debris hold the cover away from the housing and can cause leaks. Scrape the surfaces gently, avoiding gouges, and wipe them with a clean cloth.
Check the cover flange for bends or nicks, since a warped flange cannot seal evenly even with a good gasket. Tighten the cover bolts in a crisscross pattern so the bead seats evenly around the perimeter. After installation, check the gear oil level and refill as needed. Regular inspection of the axle housing helps spot leaks early.
- Clean both mating surfaces before fitting
- Inspect the cover flange for warping
- Tighten the bolts in a crisscross pattern
- Check the fluid level after the cover is on
Specifications
| Brand | Lube Locker |
|---|---|
| Part number | LULLLR-C925 |
| Axle type | Chrysler 9.25 inches |
| Axle location | Front |
| Popular axle manufacturer | Chrysler |
| Construction | Steel core with rubber coating and elastomer beading on both sides |
Vehicle fitment
It fits Chrysler 9.25-inch front axles, identified by axle rather than by vehicle. Confirm your axle matches this gasket before ordering.
No vehicle years or models are listed. Check your axle’s specifications before ordering.
Installation notes
Installation is dry. The full perimeter bead on both sides keeps the gasket from splitting or extruding during installation, so no sealant is needed.
What’s included
The gasket is the only item supplied. Cover bolts and gear oil are not included.









