Overview
The LLR-G850 is a differential gasket for the GM 8.5-inch 10-bolt rear axle. It also fits the GM 8.6-inch 10-bolt rear axle.
The gasket has a steel core coated in rubber and elastomer beading on both faces. Lube Locker says installation is dry, with no additional sealant and no setup time.
The gasket seals without silicone and resists torque loss, splitting and extrusion during installation, which helps with covers that are hard to break free.
Key features
- Steel core with a rubber coating
- Elastomer beading on both sides of the gasket
- Also fits the GM 8.6-inch 10-bolt rear axle
- Dry installation with no sealant needed
Before you install
Differential gaskets seal the cover to the housing, and on a cover that has been in place for years the old gasket often leaves residue that makes the surface hard to clean. Clean both mating surfaces thoroughly with a solvent suited to gear oil, and remove old material from the bolt holes so the cover seats flat. A flat, clean flange matters as much as the gasket itself in preventing leaks.
Gear oil is the main fluid these gaskets hold back. After the first few drives, check the cover for seepage and re-check the cover bolts to the torque your axle requires. Rubber-coated steel cores are generally reusable only when undamaged, so inspect the old gasket for cracks, flat spots or hardening before deciding.
- Inspect the cover flange for warping
- Check fill and drain plugs for seepage
- Replace the gasket if it shows cracks or flattening
Specifications
| Brand | Lube Locker |
|---|---|
| Model | LLR-G850 |
| Axle size | GM 8.5-inch or 8.6-inch, 10-bolt |
| Axle location | Rear |
| Axle maker | GM |
| Gasket construction | Steel core with rubber coating and elastomer beading on both sides |
| UPC | 859167006093 |
Vehicle fitment
It is sized for the GM 8.5-inch and 8.6-inch 10-bolt rear axles, and it is designed for those two axle sizes only.
Measure the cover and confirm the bolt pattern and size before installing the gasket.
Installation notes
This GM gasket is a dry-fit part with no setup time. Confirm the cover is a GM 10-bolt before fitting.
What’s included
One differential gasket for GM 8.5-inch or 8.6-inch 10-bolt rear axles.









