Overview
The Lube Locker LLRC825 is a differential cover gasket for the Chrysler 8.25-inch rear axle. It uses a steel core coated in rubber, with elastomer beading along the full perimeter on both faces.
Installation is dry, with no sealant and no setup time. The gasket is built so it does not split or extrude, and it is made to seal the rear differential cover on the Chrysler 8.25-inch axle.
Key features
- Steel core with a rubber coating
- Elastomer beading on both sides, along the full perimeter
- Dry installation with no additional sealant
- No setup time required
Preparing the sealing surface
A dry gasket only seals as well as the surfaces it touches. Before fitting, clean the differential cover flange and the housing face with a plastic scraper and a solvent-safe wipe, removing old gasket material, grit and any oil film. A clean, flat surface lets the rubber-coated core and beading seat evenly around all the bolt holes.
Bolt torque matters as much as cleanliness. Tighten the cover bolts in a crisscross pattern so the gasket compresses evenly, and recheck after the first fluid change. If the cover bulges or fluid starts seeping at one corner, the cover may be warped or the bolts uneven, so check that before refilling the axle.
- Clean both mating faces thoroughly
- Tighten bolts in a crisscross pattern
- Check for seepage after the first drive
Specifications
| Brand | Lube Locker |
|---|---|
| Model | LLRC825 |
| Axle size | Chrysler 8.25-inch |
| Axle location | Rear |
| Axle maker | Chrysler |
| Gasket construction | Steel core with rubber coating and elastomer beading on both sides |
| UPC | 700003608691 |
Vehicle fitment
The gasket is sized for the Chrysler 8.25-inch rear axle and is designed to fit that cover size. Verify the year, model and trim of your vehicle before ordering.
Measure the 8.25-inch cover against the gasket before installing it, so the bolt holes line up.
Installation notes
No RTV is needed, since this is a dry-fit design. Check the cover’s fit against the gasket before installing it.
What’s included
One differential cover gasket for the Chrysler 8.25-inch rear axle.














