Overview
The Lube Locker Ford 9-inch differential cover gasket seals the cover on a Ford 9-inch front axle. It has a steel core coated in rubber and elastomer beading along the full perimeter on both faces.
The gasket is designed to avoid splitting or extruding during installation. Installation is dry, with no sealant needed and no setup time. It is for the front axle location on a Ford 9-inch axle.
Key features
- Steel core with a rubber coating
- Elastomer beading on both sides of the gasket, along the full perimeter
- Dry installation with no additional sealant
- No setup time before installation
- The steel core and elastomer beading are designed to resist splitting and extruding during installation.
Ford 9-inch cover care
A differential cover gasket has to hold gear oil under pressure and flex from the housing, so a cover that sits unevenly can weep at a low point first. Gaskets that are seated well, with clean and flat faces, tend to last longer than ones pressed against dirty or bent flanges. Keep an eye on the cover after any axle service, since disturbing the cover can change how the gasket sits.
Before fitting, clean the cover and housing faces thoroughly and look for damage to the flange. Tighten cover bolts evenly so the gasket compresses without pinching along one side. After the first drives, check the cover edge for seepage and re-check the bolts. Confirm the gear oil level after a change, because a slow leak can drop fluid without obvious drips on the ground.
- Clean both sealing faces thoroughly
- Inspect the cover flange for dents
- Tighten bolts evenly across the cover
- Check fluid level after the first drives
Specifications
| Brand | Lube Locker |
|---|---|
| Axle size | Ford 9-inch |
| Axle location | Front |
| Axle maker | Ford |
| Gasket construction | Steel core with rubber coating and elastomer beading on both sides |
| UPC | 859167006048 |
Vehicle fitment
It is sized for the Ford 9-inch axle. Fit depends on axle size and cover, not on a vehicle year or chassis code.
Check that the cover size matches your axle before installing the gasket. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The gasket goes on dry. Lube Locker says no sealant or setup time is needed, and the Ford 9-inch cover size should be checked before fitting.
What’s included
One differential cover gasket for the Ford 9-inch axle.









