Overview
The Currie 1 Ton Ball Joint Set, part number CURCE-0005IKBJ, is an upper and lower ball joint kit for one knuckle on Currie 1 ton front ends. It fits the iron 1 ton knuckle and the Currie aluminum 1 ton knuckle used in Currie 1 ton front-end applications.
The set works on either the right or left knuckle. The joints are not lubeable.
Key features
- Upper and lower ball joints in one set for a single knuckle
- Fits iron 1 ton knuckles and Currie aluminum 1 ton knuckles
- Works on either the right or left knuckle
- Upper ball joint supplied with nut and cotter pin
- Lower ball joint supplied with nut, no cotter pin needed
- Not lubeable
Replacing one knuckle’s joints
Ball joints connect the steering knuckle to the control arms and let the wheel pivot while the suspension moves. On a 1 ton front end they carry heavy loads, so wear appears as looseness at the steering wheel and uneven tire wear before a joint fails. Before pulling a knuckle, inspect the other joints on the same arm and the tie rod ends, since worn parts are often replaced in the same job.
Because this set covers one knuckle, plan the job one side at a time. If the opposite knuckle shows similar play, a second set keeps both sides matched. Clean the knuckle bore and seats before pressing in new joints, then check that each joint moves freely and that the dust boots are intact.
- Play at the stud with the wheel lifted
- Torn or cracked dust boots
- Wear or scoring in the knuckle bore
Specifications
| Brand | Currie |
|---|---|
| Part number | CURCE-0005IKBJ |
| Type | Ball joint kit, upper and lower |
| Lubeable | No |
| Knuckle compatibility | Iron 1 ton and Currie aluminum 1 ton |
| Coverage | One knuckle |
| Fitment tag | Universal fit |
Vehicle fitment
It is a universal fit set for Currie 1 ton front-end knuckles, either iron or Currie aluminum.
Match the knuckle type rather than a vehicle: confirm yours is an iron or Currie aluminum 1 ton unit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The upper joint uses a nut and cotter pin, while the lower joint uses only a nut, so have a cotter pin ready for the upper joint.
What’s included
One upper ball joint with nut and cotter pin, and one lower ball joint with nut. The set covers one knuckle.









