Overview
The Fabtech FTS30051 is an upper ball joint, part number FABFTS30051, built for performance vehicles that see heavy stress. It is designed for the stress and abuse of performance use and works with the Fabtech Control Arm and Spindle lift system.
It is universal fit, so verify the fit against your control arm and spindle layout before ordering.
Key features
- Upper ball joint for control arm and spindle setups
- Lubeable design
- Designed to handle performance-vehicle loads
- Works with the Fabtech Control Arm and Spindle lift system
Upper joint wear and service
An upper ball joint sits at the top of the knuckle, where it takes load from the control arm and spindle geometry. Wear here shows up as a light tap or clunk at the top of the wheel, and the tire may scrub on one edge. Because the joint is lubeable, its boot and grease fitting are worth checking at each service, since dry joints wear quickly under hard use.
Performance use puts extra stress on steering and suspension parts, so inspect the upper joint alongside the lower joint and the control arm bushings. Look for grease leaking past the boot, cracks in the seal, and play when the tire is rocked at the top and bottom. Replace a joint that shows play before it affects steering alignment.
- Grease fitting clear and accessible
- Boot intact with no grease leaks
- No play felt at the stud
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS30051 |
| Position | Upper |
| Lubeable | Yes |
| Fitment field |
Vehicle fitment
Fabtech marks this ball joint universal fit, with no vehicle years, makes or models given. Fitment is not confirmed for any specific vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The joint is lubeable, so greasing it is part of routine maintenance. Confirm the grease type and interval for your vehicle before servicing the joint.
What’s included
One upper ball joint is described. No other components are named.









