Overview
The Currie CE-9113BL threaded bung with jam nut is a 1 inch -14 left hand thread weld-in bung. It is made for forged Johnny Joint rod ends or any other 1 inch thread rod end, and it is sold each.
Left hand threads run opposite to right hand threads, so a left hand bung pairs with a right hand part when a link needs opposing ends. The hex shape helps with bar adjustment, and a custom machined jam nut of the same hex size is included. The bung is designed for a tube with a 1-1/4 inch inside diameter. No vehicle is named, since the bung is a custom build part.
Key features
- Left hand 1 inch -14 thread
- Weld-in design, not a bolt-in part
- Hex shape that eases bar adjustment
- Custom machined jam nut included
- Minimum tube inside diameter 1-1/4 inch
- Sold each
Matching opposing ends
Opposing rod ends let a link adjust in both directions as the bar is turned. Left hand and right hand parts are paired so that rotating the link shortens one end while lengthening the other. Before welding, mark which side of the link receives each thread so the ends are not reversed during assembly.
Weld-in parts need clean metal and steady heat. Remove paint and rust from the tube where the bung sits, and tack the bung in place before finishing the weld. Check that the threads still turn freely after the tube cools, and keep the jam nut on until final alignment is complete.
- Mark each end before welding
- Clean metal where the bung sits
- Check thread movement after cooling
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9113BL |
| UPC | 70000410802 |
| Thread size | 1 inch -14 |
| Thread direction | Left hand |
| Minimum tube ID | 1-1/4 inch |
| Jam nut | Included |
| Sold | Each |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit, not a vehicle-specific part. Its use depends on the tube it is welded into and the left hand rod end threaded onto it.
Confirm the thread direction on the rod end is left hand before welding, since a right hand end will not match.
Installation notes
Check the thread direction and the tube size before welding, because the bung is not designed to be bolted in. Weld only into tubing at least 1-1/4 inch inside diameter.
What’s included
One left hand weld-in bung with its custom machined jam nut, sold each.
Not included: the tube and the matching rod end.






