Overview
The Crown Automotive 52000706AB is a heavy-duty, 4-leaf rear leaf spring for the 1984–2001 Jeep Cherokee (XJ), with a 6-5/8 inch arch. The arch height is the main measurement to compare against the spring you are replacing.
It is a single spring with a stock-height direct replacement lift range, and bushings are not included. The UPC is 848399038033.
Key features
- Heavy-duty construction designed to carry more load.
- Four-leaf pack
- 6-5/8 inch arch
- Rear position
- Stock-height direct replacement
Arch height and fit
Arch height describes how much the leaf pack curves when the spring is unloaded, and it strongly affects where the spring eyes sit once the axle is installed. Comparing the arch of the new spring with the old one helps confirm that ride height and axle position will stay close to what the vehicle had before.
A heavy-duty leaf pack is designed to carry more load, but it still needs sound eyes, bushings and hangers to work properly. Set the axle on stands during removal, check the bushings against the eyes, and tighten fasteners only after the spring is seated in its correct position.
- Measure the old spring’s arch before removal
- Check spring eyes for cracks or elongation
- Replace worn bushings and hardware with the spring
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52000706AB |
| UPC | 848399038033 |
| Position | Rear |
| Leaf count | 4 |
| Arch | 6-5/8 inch |
| Spring quantity | Single spring |
| Lift height range | Stock height, direct replacement |
| Bushings | Not included |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee (XJ). Wrangler and Grand Cherokee models are not covered by this spring.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 6-5/8 inch arch with the spring you are removing before the new spring is fitted. Support the axle on stands during removal, and check the spring eye bushings before assembly.
What’s included
One rear leaf spring assembly.
Not included: Bushings.









