Overview
The Crown Automotive 52000051 is a standard 4-leaf rear leaf spring assembly for the 1984–2001 Jeep Cherokee (XJ). It is a single-spring design for stock-height direct replacement, not a lift part.
The spring is sold without bushings. If you are swapping out a worn rear spring, keep the old bushings on hand to measure against the new eyes.
Key features
- Standard design
- Four leaves in the pack
- Rear position
- Single spring per vehicle
- Stock-height replacement range
Matching the old spring
Before fitting a replacement rear spring, measure the old spring’s overall length, eye spacing and arch so the new spring sits at the same height and angle. Matching these dimensions keeps the axle in its correct position and helps the shackles and bushings line up without forcing the spring into place.
Look over the old spring for sagging leaves, cracks and worn eyes, and check the mounting hardware and shackles for play. A spring that has taken a set over time may need to be replaced along with its bushings, since a worn bushing can let the spring shift under load.
- Measure eye-to-eye length before removing the old spring
- Compare leaf count and arch with the replacement
- Replace worn hardware while the spring is out
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52000051 |
| UPC | 848399012149 |
| Design | Standard |
| Position | Rear |
| Leaf count | 4 |
| Spring quantity | Single spring |
| Lift height range | Stock height, direct replacement |
| Bushings | Not included |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee (XJ) only. Liberty, Grand Cherokee and Wrangler models are not covered by this spring.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Park on level ground, chock the wheels, and support the axle before removing the old spring hardware. Start the new spring fasteners by hand and tighten them only once the spring sits in its correct position.
What’s included
One rear leaf spring assembly.
Not included: Bushings.









