Overview
The Crown Automotive 68004080AA is a Dana 30 front passenger side axle shaft with 27 splines. It fits 2- and 4-door 2007–2015 Jeep Wrangler JK models, and it is the passenger side shaft for the Dana 30 front axle.
The axle type is Dana 30 JK and the position is front right. It is a direct fit for the Wrangler JK. The shaft is a full-length piece for the passenger side only. It suits both 2-door and 4-door JKs, including the Unlimited trims, which share this shaft. If the driver side shaft is needed, it is the separate part 68004081AA. Check that your JK’s front axle is a Dana 30 before ordering. Owners who run larger tires or trail-drive often replace front shafts in pairs, so ordering both sides together can save a second repair.
Key features
- Front passenger side axle shaft
- Dana 30 JK front axle, 27 splines
- Suits 2 and 4-door models
- Position given as front right
- Classed by Crown Automotive as a direct fit
Axle shaft wear signs
A front axle shaft works in a harsh spot. It carries drive torque to the hub while the wheel steers and moves up and down, so the joints take a lot of stress. A torn joint boot is often the first sign of trouble, since grease escapes and grit enters the joint. Left alone, the joint can wear until it clunks or binds in turns.
When a shaft is removed, inspect the splines on both ends and the joint for play, roughness or heat marks. Check the hub bearing and the axle seal on that side as well, since they are often disturbed during the job. Inspecting the opposite shaft at the same time is a practical habit when both have seen the same use.
- Look for torn or split joint boots
- Inspect the splines for twisting or wear
- Check the axle seal when the shaft is out
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 68004080AA |
| UPC | 848399048025 |
| Axle manufacturer | Dana |
| Shaft location | Passenger Side |
| Axle position | Front |
| Axle type | Dana 30 JK |
| Position | Front Right |
| Spline count | 27 Splines |
| Body styles | 2 and 4-door models |
Vehicle fitment
Crown Automotive lists one vehicle for the 68004080AA.
- 2007–2015 Jeep Wrangler (JK) (70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X)
The 2007–2015 Wrangler JK is covered, Unlimited trims included. Earlier Wranglers, the JL and non-Dana 30 front axles are outside the list. Confirm your vehicle’s year, model and trim before ordering.







