Overview
The Crown Automotive J3250005 is a pilot bushing for the 2.5L 4 cylinder engine. A pilot bushing sits in the crankshaft and supports the front of the transmission input shaft.
It fits 1983–2000 Jeep Cherokee (XJ), Wrangler (YJ and TJ), Comanche, Scrambler, Wagoneer (SJ), and CJ5, CJ7 and DJ5 models.
Key features
- Made for 2.5L 4 cylinder engines
- Fits XJ, YJ and TJ era Jeep models
- Also fits Comanche, Scrambler and CJ models
- Crown Automotive part number J3250005
Fitting and alignment
A pilot bushing holds the front of the transmission input shaft in the crankshaft, keeping the shaft centered during clutch engagement. Wear shows up as a rattle at idle, a clutch that feels rough when it engages, or difficulty sliding the transmission into place. When the clutch is replaced, check the pilot bushing at the same time, since it is inexpensive to replace while the drivetrain is apart.
Before installation, clean the bore and remove any old grease or debris. Use an alignment tool that matches the clutch disc splines so the disc stays centered while the transmission is mated. Apply a light coat of grease to the bushing’s inside surface where the input shaft rides, but avoid over-greasing. A bushing pressed in squarely and seated fully helps the clutch work properly.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3250005 |
| UPC | 848399061666 |
| Part type | Pilot bushing |
| Engine application | 2.5L 4 cylinder |
Vehicle fitment
It fits 1984–2000 Jeep Cherokee (XJ), 1987–1995 Wrangler (YJ), 1997–2000 Wrangler (TJ), 1986–1992 Comanche, 1983–1985 Scrambler, 1984–1987 Wagoneer (SJ), 1983 CJ5 and DJ5, and 1983–1986 CJ7.
It is not made for the Cherokee (KJ), Liberty, Grand Cherokee or Wrangler JK and later models. Check the year, model and trim of your vehicle against this fitment before buying.
What’s included
One pilot bushing, Part Number J3250005.












