Overview
The Crown Automotive 4006698K is a U-joint strap and bolt kit for front or rear U-joints. It is made for most 1210, 1310 and 1330 series yokes with a 1.062 inch small cup, and it includes the hex head grade 8 bolts needed to secure the strap at 1.587 inch center to center.
The kit fits a wide range of Jeep vehicles, from the 1970s CJ and SJ generation through the Cherokee, Wrangler TJ and YJ, and several J-series trucks. Use the vehicle fitment section below to confirm your model and year.
Key features
- For front or rear U-joints
- For most 1210, 1310 and 1330 series yokes with a 1.062 inch small cup
- Grade 8 bolts, 1/4 inch by 5/8 inch, fine thread
- 1.587 inch bolt center to center
- Hex head bolts included
Choosing the right yoke and bolts
A U-joint strap holds the cups in the yoke ears so the cross cannot walk out of position. Before fitting, measure the yoke cup and check that the ears are not bent or cracked, since a strap cannot correct a worn or distorted yoke. Yoke series can look similar, so comparing the cup diameter with the old hardware helps avoid mismatched parts.
Fine-thread grade 8 bolts are strong, but they still need clean threads and the correct tightening sequence. Use new bolts when reusing the strap, and check the joint for play after the first drives. When the joint shows rust or noise, replacing the whole U-joint along with the strap is often easier than repeated adjustment.
- Check yoke ears for cracks or distortion
- Clean threads before installing new bolts
- Inspect the cross and bearing caps for wear
- Recheck bolt tightness after the first few drives
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4006698K |
| UPC | 848399075809 |
| Yoke series | 1210, 1310 and 1330 small cup |
| Cup size | 1.062 inch |
| Bolt size | 1/4 inch – 28 x 5/8 inch fine thread, grade 8 |
| Bolt center to center | 1.587 inch |
| Bolt head | Hex |
| Position | Front (for front or rear U-joints) |
Vehicle fitment
It fits the 1974–1983 Jeep Cherokee (SJ), 1984–2001 Jeep Cherokee (XJ), 1972–1983 Jeep CJ5, 1972–1975 Jeep CJ6, 1976–1986 Jeep CJ7, 1986–1992 Jeep Comanche, 1972–1973 Jeep Commando, 1972–1983 Jeep DJ5, several 1972–1988 Jeep J-series trucks, 1999–2004 Jeep Grand Cherokee (WJ), 1993–1998 Jeep Grand Cherokee (ZJ), 1984–1991 and 1993 Jeep Grand Wagoneer (SJ), 2002–2004 Jeep Liberty (KJ), 1981–1985 Jeep Scrambler, 1972–1990 Jeep Wagoneer (SJ), 2004 Jeep Wrangler (LJ), 1997–2004 Jeep Wrangler (TJ) and 1987–1995 Jeep Wrangler (YJ). The Wrangler JK and JL fall outside this fit. Confirm fit for your vehicle’s year, model and trim before ordering.
The Wrangler JK and JL are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the yoke cup size against 1.062 inch before fitting, since the kit is made for the small cup series only. Use the grade 8 bolts supplied with the kit.
What’s included
The U-joint strap and bolt kit, with hex head bolts included.









