Overview
The Energy Suspension 9.9104R is a urethane bump stop for control arms, traction bars, axles and leaf springs. Bump stops cushion a collapsing suspension at the end of its travel, and Energy Suspension says urethane lasts longer than factory rubber stops.
The line includes a smaller general purpose bullet-shaped snubber suited to control arms, along with larger race styles. Confirm the shape and mounting before ordering.
Key features
- Urethane construction, which Energy Suspension says outlasts O.E.M. rubber stops
- General purpose bullet-shaped snubber design
- Race styles with a reinforced metal plate molded into the stop
- Designed for track and off-road use.
Bump stop wear and replacement
A bump stop works hardest when a suspension bottoms out, so the material and its bond to the mount both see repeated impact. Urethane resists wear better than many rubber stops, but it can still chunk, crack or flatten over time. Inspect the stop during each service visit, particularly after rough trails, and replace it when the surface shows damage or the stop no longer sits square.
Replace stops in pairs on the same axle when one side is worn, since both sides usually see similar use. Clean dirt and rust from the mounting surface before installing the new stop, and confirm it sits fully seated at the mount. Race-style stops with a metal plate suit harder use, while general purpose stops suit control arm and axle applications on street or light trail vehicles.
- Look for cracks or chunks
- Check for flattening under load
- Keep mounting bolts snug
- Clean the mount before fitting
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 9.9104R |
| Product type | Urethane bump stop |
| Applications | Control arms, traction bars, axles, leaf springs |
Vehicle fitment
It is universal fit, so the right choice depends on the mounting point rather than a year, make or model.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the mounting location and stop shape before ordering, and confirm which mounting hardware your installation needs.










