Overview
The Energy Suspension 9.9148G is a universal bump stop in black urethane with a flat head pad style. It measures 0.75 in. high with a 2.75 in. diameter and is meant for control arms, traction bars, axles and leaf springs.
Urethane stops are designed to last longer than original rubber ones and to cushion a collapsing suspension, which helps limit costly damage. The range also includes a small bullet-shaped snubber for control arms and larger competition-style stops with a reinforced metal plate.
Key features
- Universal bump stop with a flat head pad style
- Black urethane construction
- Intended for control arms, traction bars, axles and leaf springs
- Two pieces without hardware
Urethane vs. rubber stops
Urethane bump stops hold their shape under repeated compression better than many rubber designs and resist oil and heat exposure. That makes them a practical choice for control arm and axle locations where a stop sees frequent contact. Their firmness also means they transmit more shock on hard bottoming, so the mounting points should be sound.
When choosing a stop, match the height to the gap you actually have at full compression rather than picking the tallest option. A taller stop can reduce the space available for other components and can change how the suspension loads near the end of travel. Measure first, then test-fit the stop with the suspension moved through its range by hand.
Stops often wear faster when the boot or jounce area is damaged, because dirt and moisture reach the contact face. Inspect for chunks missing, cracking or a flattened face during routine service, and replace worn stops in pairs so both ends of the axle or arm load the same way.
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 9.9148G |
| UPC | 703639717393 |
| Material | Urethane |
| Color | Black |
| Pad style | Flat head |
| Height | 0.75 in. |
| Diameter | 2.75 in. |
| Quantity | 2 pieces |
| Hardware | Not included |
| Position | Rear |
Vehicle fitment
It is a universal fit, so no year, make or model applies. Match the 0.75 in. height and 2.75 in. diameter to your mounting location instead.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The pieces come without hardware, so have mounting bolts or studs ready. Measure the mounting space against the 0.75 in. height so the stop seats without binding.
What’s included
Two black urethane bump stop pieces.
Not included: Mounting hardware.









