Overview
The Pro Comp 7210-E is a braided stainless steel rear brake hose kit for the 1984–1995 Toyota 4Runner and the 1979–1995 Toyota Pickup with 4 to 6 inches of lift. Pro Comp says stainless lines do not swell under the increased braking pressure that larger tires create.
Key features
- Braided stainless steel
- For 4 to 6 inch lifts
- Rear hose, 20.50 inches
- 10MM x 1.0 female to 10MM x 1.0 male
- Supplied as a kit
- Stainless lines resist swelling under increased braking pressure
Why braided lines on lifts
A raised suspension changes the path a brake line travels, and a rear hose that was adequate at stock height can be stretched or pulled at full droop. Braided stainless hoses are commonly chosen for lifted trucks because their construction resists swelling and keeps pedal feel more consistent under heavy braking. Route the new hose clear of the axle, spring and shock, and make sure it does not rub against the frame or brackets.
Rubber hoses age even when they look intact, so replacing them during a lift is a sensible time to do it. Look for cracks, bulges, leaks at the fittings or a soft pedal, and inspect the hose during tire rotations. Before fitting, compare the hose length and fitting ends with the old hose to confirm the replacement suits the current ride height.
- Route the hose clear of moving parts
- Check fittings for leaks after bleeding
- Inspect aged rubber lines during service
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 7210-E |
| UPC | 614901180039 |
| Type | Braided stainless steel |
| Position | Rear |
| Hose length | 20.50 inches |
| Fittings | 10MM x 1.0 female to 10MM x 1.0 male |
| Lift range | 4 inches to 6 inches |
| Length class | Lifted |
| Fit | Direct fit |
Vehicle fitment
It fits the 1984–1995 Toyota 4Runner and the 1979–1995 Toyota Pickup.
Tacoma and later 4Runner models are outside this fit. Confirm your year, model and trim before buying.
What’s included
Brake hose kit.








