Select your vehicle

Brake Hose Kit

Pro Comp Suspension

Shop Ford Bronco Brake Hoses on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 1986 to 1997 Ford Ranger and Bronco models
  • Braided stainless steel hose for 0 to 6 inches of lift
  • 10 mm banjo to 3/8-24 female fitting
  • Front line, 29.50 in long, driver or passenger side
  • Sold individually

Description

Overview

The Pro Comp Suspension 7315-AB is a braided stainless steel front brake hose for lifted vehicles, sold individually. It fits 1986 to 1997 Ford Ranger and Bronco models and covers a 0 to 6 inch lift.

Stainless steel braided hose will not swell under the higher braking pressure that larger tires put on the system, which makes it a replacement option for stock rubber lines when a truck has been raised.

Key features

  • Braided stainless steel construction for lifted ride heights
  • 0 to 6 inch lift range
  • 10 mm banjo fitting on one end, 3/8-24 female fitting on the other
  • Driver or passenger side
  • Sold individually

Choosing the right setup

A lifted Ford Ranger or Bronco changes the geometry between the frame and the front wheels, so the brake hose has to flex through a greater range of motion. A hose that rubs or stretches at full droop can fail early, which is why fit and routing deserve attention before the truck goes back on the trail.

Braided stainless construction is a practical choice for a raised truck because it resists the swelling that can occur in rubber lines under pressure. The hose still has to be the right length and fitting style for the caliper it connects to, so compare the old line side by side with the new one before removing anything.

  • Match the banjo or flare end to the caliper before ordering
  • Check clearance at full suspension travel and full steering lock
  • Route the hose away from sharp edges and exhaust heat

Specifications

Brand Pro Comp Suspension
Part number 7315-AB
UPC 614901180336
Hose length 29.50 in (front)
Lift range 0 to 6 in
Fittings 10 mm banjo to 3/8-24 female
Hose material Braided stainless steel
Position Front, driver or passenger side
Sold as Individually

Vehicle fitment

This front brake hose fits 1986 to 1997 Ford Ranger and Bronco models.

Fit is known only for the 1986 to 1997 Ford Ranger and Bronco, so confirm your vehicle’s year, model and trim before buying.

What’s included

One front brake hose, sold individually.

SKU: EXP7315-AB Category:

Specification

Shipping weight 0.45 lbs
Package dimensions 17.50 × 5.60 × 1.50 in
brands

Fitment

VehicleYearsTrims
Ford Bronco likely fits1986–1997All
Ford Ranger likely fits1986–1997All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Pro Comp 7315-AB fit a 1990 Ford Bronco?

Yes, 1990 falls within the 1986 to 1997 Ford Ranger and Bronco range this hose fits. Confirm the year, model and trim of your truck before ordering, since the hose is sized for those vehicles.

How long is the Pro Comp 7315-AB brake hose?

The front hose is 29.50 in long and is sold individually for either the driver side or the passenger side. Its braided stainless steel construction resists swelling under the higher pressure from larger tires.

What lift height is this brake hose rated for?

It is rated for a 0 to 6 inch lift. The hose has a 10 mm banjo fitting on one end and a 3/8-24 female fitting on the other, as shown in the specifications table.

What should be checked when a brake hose is replaced on a lifted truck?

Check the routing for clearance at full suspension travel, and make sure the hose does not rub on the frame, springs or tire. Confirm the fitting ends match the caliper and the line being replaced. Tighten each fitting carefully and check for leaks.

Do I need to bleed the brakes after installing a new hose?

Yes. Air can enter the system whenever a hose is disconnected, so bleed the brakes after the new hose is installed. Check the pedal feel before driving the truck.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford Bronco Brake Hoses on Amazon