Overview
The Pro Comp 7340 is a stainless steel braided brake hose kit for the 1966 to 1977 Ford Bronco and the 1975 to 1977 Bronco Sport. It is made for a lifted early Bronco and is listed at a lift height of 4.
The kit uses a center front hose and a center rear hose instead of separate left and right hoses at each end. The stainless braid will not swell under the higher braking pressure that larger tires create.
Key features
- Stainless steel braid replaces stock rubber hoses
- Front center hose and rear center hose
- Lift height of 4
- Direct fit
- D.O.T. compliant
- Resists swelling under heavy braking
Before you buy
Brake hoses carry fluid from the chassis lines to the calipers, so a lifted Bronco places more demand on them than a stock one. When the wheels sit farther from the frame, stock rubber hoses are stretched and may flex more under load. Braided stainless hoses resist expansion, which helps keep the pedal firm when braking hard on larger tires.
Before buying, measure the distance between your existing brake line mounting points and the calipers, then compare it with the center hose lengths in this kit. Check that the hoses clear the axle, springs and steering components through full suspension travel. Route them so they cannot rub on the frame or exhaust.
Signs that an older hose needs replacing include cracks in the rubber, bulges under pressure, fluid seeping at the fittings and a soft or spongy pedal. Braided hoses are less likely to bulge, but the fittings still need checking for leaks at every service.
- Check hose routing at full droop and full compression
- Replace brake fluid after the hoses are installed
- Inspect fittings for seepage at each oil change
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 7340 |
| UPC | 614901180398 |
| Product type | Brake hose kit |
| Hose material | Stainless steel braid |
| Front center hose length | 21.5 inch |
| Rear center hose length | 20.5 inch |
| Lift height | 4 |
| Lift range | 4 inch to 6 inch |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1966 to 1977 Ford Bronco, including Roadster, Wagon and Sport versions, and the 1975 to 1977 Ford Bronco Sport. Broncos from 1978 onward are outside this kit’s fit range. Confirm fit for your vehicle’s year, model and trim before ordering.
Broncos from 1978 onward are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One kit with a front center hose and a rear center hose in stainless braid.














