Overview
The Pro Comp Suspension 7335 is a complete stainless steel braided brake hose kit for vehicles with increased ride height. It replaces stock rubber brake hoses, and its braided steel lines are designed not to swell under the higher braking pressure from larger tires.
The kit is packaged as a complete set with front and rear lines and is built to D.O.T. specifications.
Key features
- Stainless steel braid replaces stock rubber brake hoses
- Designed for vehicles with a 4 to 6 inch lift
- Front center length 21 inches
- Rear center length 29 inches
- Packaged as a complete kit
- D.O.T. compliant hoses
Fitting a full brake line kit
A complete set replaces the rubber hoses at both ends of the brake system at once. That approach keeps the front and rear lines the same age and the same material, so no single section lags behind when the vehicle is raised and the suspension changes.
Before installing, measure the old lines from end to end and compare them with the kit lengths. A raised truck often needs the lines to reach farther, and the routing must keep the braided hose clear of the tire, springs and frame at full travel. Bleed the system once the lines are on.
- Keep the old lines until the new set is confirmed to fit
- Label each line by position as it comes off
- Check every fitting for leaks after bleeding
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 7335 |
| UPC | 614901180374 |
| Front center length | 21 in |
| Rear center length | 29 in |
| Lift range | 4 to 6 in |
| Hose material | Stainless steel braid |
| Standard | D.O.T. |
Vehicle fitment
The kit is sized for increased ride height, so match its lengths and fittings to your truck’s brake lines before ordering.
The kit is designed for vehicles with increased ride height, so a stock-height vehicle may need different lengths. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A complete set of stainless steel braided brake hoses for the front and rear of the vehicle.















