Overview
The B&M 40298 is a rear differential cover for the Ford 9.75 in. axle, part number B/M40298. It comes with the cover, fill and drain plugs, bolts, washers, load bolts and nuts.
A cover is sized for one axle, so match the 9.75 in. Ford axle on your vehicle before ordering. Do not rely on the Universal Fit tag.
Key features
- Differential cover for the Ford 9.75 in. axle
- Includes fill and drain plugs
- Includes bolts, washers, load bolts and nuts
- Rear-mount cover
Before you install
A rear differential cover does more than seal the housing. It keeps gear oil in and dirt out, and it gives you access to the gears for inspection and fluid changes. On a Ford 9.75 in. axle, the cover is also the point where you check for metal debris, which can signal wear in the gears or bearings. Many owners pull the cover for a fluid check, so it helps to plan that access when you install.
Before fitting a replacement, clean the mating surface on the housing and inspect it for nicks. A damaged flange can leak even with a new gasket. When you service the axle, compare the fill and drain plug threads with the housing, and replace any plug that strips easily. Tighten bolts evenly in a crisscross pattern to keep the cover flat against the housing.
- Clean the housing surface before fitting
- Check fluid level after the first drive
- Re-check bolt torque after the first few trail runs
Specifications
| Brand | B&M |
|---|---|
| Part number | B/M40298 |
| Axle location | Rear |
| Axle type | Ford 9.75 in. |
| Included hardware | Cover, fill and drain plugs, bolts, washers, load bolts, nuts |
Vehicle fitment
No vehicle is named. Ford 9.75 in. identifies the axle, not a truck or model year, so check your axle size before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The cover, fill and drain plugs, bolts, washers, load bolts and nuts come with it. Check the package contents against your installation before starting.









