Overview
The B&M Ford 8.8 Inch Aluminum Cover (part 40297) is a natural cast aluminum rear differential cover for Ford 8.8 inch axles, with extra oil capacity.
Heavy duty cooling fins and extra fluid capacity help the oil run cooler. The 3/4 inch thick lip provides a positive seal, built-in bearing cap bolts add support, and a magnetic drain plug makes servicing possible without removing the cover.
The 3/4 inch lip is what B&M credits for positive sealing, so it is worth checking that the sealing face is clean and undamaged before fitting the cover.
Key features
- Heavy duty cooling fins
- 3/4 inch thick lip for positive sealing
- Built-in bearing cap bolts
- Magnetic drain plug
- Extra fluid capacity
- Natural aluminum finish
Before fitting the cover
A differential cover is a simple part, but the sealing edge does most of the work. Wipe the mating face clean, remove old gasket material and look for nicks or warping before setting the cover in place. A damaged edge can weep oil even when the bolts are tight.
Covers with extra capacity are often fitted alongside other differential work, such as a new gear oil or a fresh set of axle seals. Check the axle seals and pinion seal at the same time, because replacing them later means draining the housing again.
- Clean the sealing face and remove old gasket residue
- Check the lip for nicks, dents or warping
- Tighten cover bolts in a crisscross pattern
- Refill with gear oil to the correct level after fitting
- Inspect for seepage after the first few drives
Specifications
| Brand | B&M |
|---|---|
| Part number | 40297 |
| Material | Cast aluminum |
| Finish | Natural |
| Axle location | Rear |
| Axle types | Ford 8.8 inch and Mazda 8.8 inch |
| Oil capacity | Extra |
| Lip thickness | 3/4 inch |
| Drain plug | Magnetic |
| Included | Built-in bearing cap bolts |
Vehicle fitment
It fits Ford 8.8 inch and Mazda 8.8 inch rear axles, so axle size determines fit.
No vehicle years or models are listed, so match the axle size to your housing before you order.
Installation notes
The 3/4 inch lip is what B&M credits for the positive seal, so inspect that sealing edge before fitting the cover.
What’s included
An aluminum cover with its magnetic drain plug and built-in bearing cap bolts.
Not included: Gear oil.









