Overview
The Rough Country 863 is a 2-inch aluminum leveling spacer for the Nissan Titan. It levels the front of the truck with the rear for a more aggressive look. It fits the 2004–2015 and 2017–2021 Titan in the trims it covers.
The spacer is machined from T6061 billet aluminum, which is intended to resist rain and rust. It is a bolt-on part, and the installation does not require disassembling the struts. Hardware is included with the spacer, and the spacer provides 2 inches of lift.
Key features
- Billet T6061 aluminum front strut extension
- Hardware included
- Easy bolt-on installation
- Keeps the factory ride quality
- Room for tires up to 33 inch
Steel vs. aluminum
Aluminum strut spacers are lighter than steel and resist surface rust, but they need attention where they meet steel hardware. Dissimilar metals can corrode together over time, so the bolts and mounting surfaces should be inspected during routine service. A thin coat of anti-seize on the fasteners is a common precaution with mixed-metal assemblies.
Spacers change how the strut loads its mount, so the fasteners should be checked for tightness after the first few drives and again during oil changes. Look for cracks at the spacer body, and make sure the spacer sits square on the strut before the wheels go back on.
- Re-check fasteners after the first few drives
- Inspect the aluminum where it meets steel hardware
- Keep road salt and mud washed from the spacer
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C863 |
| Front lift height | 2 inch |
| Lift method | Front strut extensions |
| Material | Aluminum, T6061 billet |
| Finish | Black |
| Position | Front |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2004–2015 and 2017–2021 Nissan Titan in the LE, Platinum Reserve, S, SE, SL, SV and XE trims. Pro-4X models are not a fit.
PRO-4X models do not fit, even though PRO-4X appears among the Titan trim range. The 2016 model year is not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The install is 100% bolt-on, and the struts do not need to be taken apart. Check the front height after installation and confirm the truck is not a Pro-4X before fitting the spacer.










