Overview
The Rancho QuickLIFT Coil Spring Spacer Lift Kit, part number RS70080, is a 1 inch coil spring spacer lift kit for the 2003-2020 Toyota 4Runner and the 2007-2014 Toyota FJ Cruiser.
The kit comes with two Rancho QuickLIFT coil spring spacers and complete installation instructions. It provides a 1 inch lift and is a direct-fit design. Confirm the intended axle, front or rear, before ordering.
Key features
- Coil spring spacer lift kit
- Lift height of 1 inch
- Two QuickLIFT coil spring spacers
- Complete installation instructions
- Direct fit
- Fits the Toyota 4Runner and FJ Cruiser
Before you fit spacers
A spacer lift raises the vehicle by placing a spacer between the coil spring and its seat, so the spring sits higher without changing its rate. That keeps the suspension geometry close to stock while adding ground clearance. It is simpler than a full lift, but it still changes how the springs are loaded and how the shocks reach their travel. Check the shock length and brake line slack after fitting, since a higher ride height can stretch lines and cables.
Spacers do not correct alignment, and they can make steering feel different. Plan an alignment after fitting, and check driveline angles if the ride height changes much. Tire clearance needs checking at full steering lock and at full suspension compression. Spacers are often installed with new shocks, bump stops and sway bar links, since those parts wear at the same time.
- Check brake lines and wiring for slack after fitting
- Re-torque suspension bolts after the first drives
- Recheck tire clearance at full steering lock
Specifications
| Brand | Rancho |
|---|---|
| Part number | None |
| Product type | Coil spring spacer lift kit |
| Series | QuickLIFT |
| Lift height | 1 inch |
| Spacers | 2 |
| Position | Rear |
| Type | Front |
| Instructions | Complete installation instructions |
| Fitment type | Direct fit |
Measure your clearance before ordering if size matters for your build.
Vehicle fitment
The manufacturer fitment list for the Rancho RS70080 spacer kit covers:
- 2003–2020 Toyota 4Runner (Limited, Nightshade, SR5, SR5 Premium, Sport, TRD Off-Road, TRD Off-Road Premium, TRD Pro, Trail, Venture)
- 2007–2014 Toyota FJ Cruiser (Base, TRD Special Edition, Trail Teams Special Edition)
Compare the part with your vehicle’s year, model, trim, engine and drivetrain before ordering, so you receive the correct kit.
The kit fits the 2003-2020 4Runner and 2007-2014 FJ Cruiser. Other Toyota models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Professional installation is recommended for suspension, steering and brake components.
- Torque every fastener to the value in the installation instructions and re-check it after the first miles of driving.
- Have the alignment checked after any suspension or steering work, and check that tires, hoses and lines have clearance through the full range of travel.
- Read all instructions before starting, and support the vehicle on jack stands rated for its weight rather than on a jack alone.
- Wear eye protection and gloves, and replace any worn, damaged or corroded fasteners.
What’s included
Two Rancho QuickLIFT coil spring spacers and complete installation instructions.








