Overview
The Bilstein BIL22-259721 is a rear right B6 Series suspension strut for the 2015 to 2017 Jeep Renegade and the 2016 to 2018 Fiat 500X. It is for front-wheel-drive (FWD) models. Confirm fit for your vehicle’s year, model and trim before ordering.
A rear strut is the damper and spring assembly that controls the movement of the rear wheel. The B6 range uses a monotube design with a velocity-sensitive, digressive piston, which Bilstein says is tuned for each application. This unit covers the right rear corner only, and the left rear strut is a separate part.
Key features
- Rear right position
- Monotube design, per Bilstein’s B6 description
- Velocity-sensitive, digressive piston
- Direct-fit application
- The B6 is designed for consistent damping with improved ride quality and comfort.
Rear strut wear and replacement
A rear strut carries part of the vehicle’s weight and controls how the spring compresses and rebounds. On the road it keeps the rear tires in contact with the surface over bumps and limits body roll through corners. Off the road, the damper takes repeated impacts from ruts and rocks, so a worn unit can let the rear end bounce or skip. Because each strut works alongside the opposite side and the rear springs, their condition affects how this one performs.
Many owners replace both rear struts together so damping stays balanced from side to side. During installation, inspect the upper mount, bushing and any spring seat for cracks or looseness, and tighten fasteners to the torque specified in the service manual. After the first few drives, recheck the hardware and listen for knocks over bumps.
- Replace rear struts in pairs for balanced damping
- Inspect upper mounts and bushings for wear
- Look for oil on the strut body
- Recheck hardware after the first drives
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL22-259721 |
| Series | B6 Series |
| Assembly type | Suspension strut assembly |
| Position | Rear right |
| Drivetrain | FWD models |
| Fitment type | Direct fit |
Vehicle fitment
The rear right strut fits the 2016–2018 Fiat 500X in Easy, Lounge, Pop, Trekking, Trekking Plus and Urbana models, and the 2015–2017 Jeep Renegade in 75th Anniversary, Latitude, Limited and Sport models.
Trailhawk is not among the covered Renegade trims. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the mounts with the original rear strut before fitting, and confirm the vehicle is FWD before fitting. Work on a securely supported vehicle.
What’s included
One rear right strut assembly. Check the package contents for a spring and mounting hardware against your installation before starting.









