Overview
The Bilstein 24-187206 is a 5100 Series front shock absorber for the 2003 to 2009 Hummer H2 in its Base trim. It carries a w/6 in lift range and has a 14.1mm eye lower mount, a stem upper mount and a 14mm shaft.
This shock is a 46mm ID smooth, non-coilover monotube design built for heavy vehicles. Its 13.52 in collapsed and 21.46 in extended lengths give 7.94 in of travel. The H2 is a heavy vehicle, and this design suits that weight class.
Key features
- High gas pressure single tube construction
- Self-adjusting deflecting disc valving
- High-flow piston intended to reduce harshness
- Independent rebound and compression tuning
- Larger working piston area for better damping
- Boot included
Choosing a lift height
Lift height is the first thing to compare when choosing a shock for a raised vehicle. A shock must reach the new suspension height without bottoming in either direction, so measure the current ride height and compare it with the lift range before buying. Heavier vehicles also need damping that matches their weight, since a shock sized for a lighter truck can feel soft under load.
Front alignment should be checked once the work is done, because even a modest change in height can alter caster and toe. Bump stops, sway bar links and brake hoses should be examined at the same time, since they are often disturbed during a shock swap. Replacing both front shocks together keeps the ride even from side to side.
- Measure ride height before ordering
- Check bump stops for wear
- Inspect sway bar end links
- Replace shocks as a pair
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-187206 |
| UPC | 651860604763 |
| Shock series | 5100 Series |
| Position | Front |
| Fitment type | Direct fit |
| Lift range | w/6 in lift |
| Collapsed length | 13.52 in |
| Extended length | 21.46 in |
| Travel length | 7.94 in |
| Lower mount | Eye 14.1mm |
| Upper mount | Stem |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Monotube |
| Reservoir | No |
| Gas charge | Gas charged |
| Finish | Zinc plated |
| Boot | Included |
Vehicle fitment
The only vehicle on the manufacturer list is the 2003 to 2009 Hummer H2 in its Base trim.
Hummer H2 trims other than Base, and the H3, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the w/6 in lift listing with your current suspension height before installing, and check front alignment once the work is finished.
What’s included
One Bilstein 5100 Series front shock absorber, part 24-187206, with the boot included. Not included: no lift components or mounting hardware are described.









