Overview
The Bilstein 24-186681 is a front 5100 Series monotube gas charged shock absorber with a 10.28 in. travel length and a rated lift of w/6 in. lift. It fits 2005 to 2016 Ford F-250 Super Duty and F-350 Super Duty trucks and is built for lifted heavy-duty applications.
The 5100 Series is built for lifted trucks, Jeeps and prerunners. Bilstein describes its single tube, high gas pressure body as delivering consistent, fade-free damping and long life, and the non-coilover body uses the stock OEM mounting configuration of the lift kits it was designed for.
Key features
- Monotube gas pressure construction
- Self-adjusting deflecting disc valving
- High-flow piston designed to reduce harshness.
- Independent rebound and compression tuning
- Larger working piston area for damping control
- Superior control for large diameter tires, per the brand
- Boot included
Heavy-duty considerations
Super Duty trucks carry heavier front axles and larger tires, so the front shock carries more load on every bump and braking event. A monotube gas charged body keeps the damping oil under pressure, which supports steady control when the truck is loaded or towing. Because these trucks often run aftermarket wheels and tires, verify that the shock’s travel and mounting angle leave enough room for the new setup.
Front shocks on heavy trucks should be checked along with the steering and suspension joints, since worn ball joints and tie rod ends make the front end feel loose even with new shocks. Inspect the eye and stem mounts for cracks, and keep the boot clean so dirt does not work into the seal. Swap front shocks in pairs so both sides damp the same way.
- Check the upper stem mount and lower eye for wear
- Inspect steering joints before installing new shocks
- Confirm lift height with the truck’s suspension before ordering
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186681 |
| UPC | 651860492988 |
| Series | 5100 Series |
| Position | Front |
| Collapsed length | 16.33 in. |
| Extended length | 26.61 in. |
| Travel length | 10.28 in. |
| Lower mount | Eye, 14.4mm |
| Upper mount | Stem |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body, non-coilover |
| Internal design | Monotube |
| Gas charged | Yes |
| Reservoir | No |
| Finish | Zinc plated |
| Boot | Included |
| Lift height rating | w/6 in. lift |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005 to 2016 Ford F-250 Super Duty and F-350 Super Duty in the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT trims.
The F-150 and the 1980 to 1996 Bronco are not on this list, and neither are model years outside 2005 to 2016. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rated lift is w/6 in. lift, so check that your truck’s suspension height falls in that range before fitting this front shock. Support the front end on stands and do not rely on a jack alone.
What’s included
One Bilstein 5100 Series front shock absorber with its boot.









