Overview
The Bilstein 24-109345 is a front 46mm monotube shock absorber in the 4600 Series. It fits the 2004–2008 Ford F-150 and the 2006–2008 Lincoln Mark LT. The heavy-duty, gas-charged unit has a yellow finish and is a direct-fit replacement.
Heat leaves the oil through the outside of the shock body in this monotube design, which Bilstein describes as technically superior and patented. A dividing piston lets the oil grow as heat builds, so foaming and viscosity loss are kept in check and damping holds up in hot conditions. The tube is made by a special extrusion process that gives a very tight peak-to-valley tolerance and steady wall thickness.
Independent tuning of compression and rebound damping is possible because of the piston head layout, and there are fewer parts than in twin-tube or road-sensing designs. Bilstein credits its seamless monotube body with extra tube strength and long service life.
Key features
- Front-position direct-fit monotube shock for the 4600 Series
- Gas-charged monotube body that moves heat away from the oil
- Dividing piston that lets oil expand without aerating
- Seamless tube for strength and heat dissipation
- Independently tuned compression and rebound damping forces
- Fewer parts than most conventional twin-tube shocks
- Listed with 0 in. lift/drop
Front-position shock service
A front shock works with the steering, so wear shows up in the front end first. Over bumps the truck may feel floaty or bounce more than before, and under braking the nose can dip further. Gas-charged monotube shocks should not be opened or heated, so a failure means replacing the unit rather than rebuilding it.
When fitting a new front shock, use fresh mounting bolts where possible and tighten the fasteners to the vehicle’s specification. Check the bushings and upper mount at the same time, since a worn mount can keep a new shock from doing its job. Matching both front shocks keeps the truck balanced under steering and braking.
- Check upper mounts and bushings during install
- Replace front shocks as a pair
- Inspect for oil seepage at the seal
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-109345 |
| UPC | 651860641249 |
| Old part number | BILF4-BE5-A934-H1 |
| Shock series | 4600 Series |
| Position | Front |
| Fitment | Direct Fit |
| Shock type | Monotube |
| Gas charging | Gas charged |
| Lift/drop | 0 in. (w/0 in. Lift/Drop) |
| Finish | Yellow |
Vehicle fitment
It fits the 2004–2008 Ford F-150 in the FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL and XLT trims, plus the 2006–2008 Lincoln Mark LT Base.
Model years of the F-150 and Mark LT outside those ranges are not covered, and neither are other Ford or Lincoln models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One 46mm monotube shock absorber, Bilstein part 24-109345, with a front position. Check the package contents and mounting bolts against your installation before starting.









