Overview
The Bilstein 5100 Series rear shock absorber, part number 24-065276, is a monotube gas-charged shock for Ford trucks, with a stated lift of 4 in. and 16mm eye mounts at both the lower and upper ends. Its collapsed length is 17.01 in., its extended length is 28.01 in., and its travel length is 11 in.
The Bilstein 5100 Series is a single tube, high gas pressure design for lifted trucks, built for steady performance and long life. This unit has a 46mm ID smooth non-coilover body, a 14mm shaft and a zinc plated finish, with no reservoir and a boot included.
Key features
- Self-adjusting deflecting disc valving for controlled damping
- High-flow piston meant to reduce harshness on rough ground
- Separate rebound and compression tuning
- Larger working piston area for damping control
- Designed for large diameter tires and specific manufacturer lift kits
- Zinc plated finish and boot
Rear shocks and lift
A rear shock on a lifted Ford truck carries the load of the axle as the suspension extends and compresses over uneven ground. When the lift is larger, the shock works through a longer stroke, so the body and mounts take more strain. A monotube design with a 46mm body and no reservoir keeps the layout compact, which suits trucks where rear clearance is limited.
Choosing a rear shock for a lifted truck means matching its length to the new suspension height, not just the old one. Check that the eye mounts clear the axle housing and frame at full extension. Leaf spring trucks often also replace spring bushings and shackles when new shocks go on, since loose hardware can wear a new shock quickly.
- Check clearance at full extension
- Inspect spring shackles and bushings
- Match lift height to shock length
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-065276 |
| UPC | 651860591544 |
| Series | 5100 Series |
| Position | Rear |
| Collapsed length | 17.01 in. |
| Extended length | 28.01 in. |
| Travel length | 11 in. |
| Lower mount | Eye, 16mm |
| Upper mount | Eye, 16mm |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body, non-coilover |
| Internal design | Monotube |
| Reservoir | No |
| Finish | Zinc plated |
| Lift height | 4 in. lift |
| Charge | Gas charged |
| Boot included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
It fits these Ford trucks: 1980–1996 F-150 (Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat); 1980–1999 F-250 in similar trims; 1999–2016 F-250 Super Duty (King Ranch, Lariat, XL, XLT); 1980–1995 F-350; 1999–2016 F-350 Super Duty (King Ranch, Lariat, Platinum, XL, XLT); and 1983–1997 Ranger (Base, Custom, GT, S, S Plus, STX, Splash, Sport, XL, XL Sport, XLS, XLT).
The list has no F-150 after 1996 and no Ranger after 1997. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package is one rear 5100 Series shock with its boot.









