Overview
The Bilstein 25-227611 is a rear 46mm monotube gas charged shock absorber from the 5160 Series, made for the 2003–2018 Toyota 4Runner and the 2007–2014 Toyota FJ Cruiser. It is a direct fit part for a 0–2 in. lift range.
The shocks are designed to improve ride performance and handling for trucks, vans and SUVs while keeping the ride comfortable. The damper is meant to keep the vehicle controlled over varied road surfaces.
Key features
- Gas charged monotube design in a 46mm body.
- Direct fit for the 2003–2018 4Runner and 2007–2014 FJ Cruiser.
- Rear position, for a 0–2 in. lift range.
- Keeps control over varied road surfaces.
- Built with a focus on long service life.
Care and maintenance
Gas charged monotube shocks rely on seals and a sealed gas charge to hold damping steady. Heat from hard use or long descents is the main stress on the body, so avoid parking directly against hot exhaust parts after a run. Wipe the body clean of mud and grit regularly, since trapped debris can wear the seal area over time.
Check the rubber bushings and the mounting bolts at each service, because loose or worn mounts change how the shock loads the axle. A shock that leaks, makes a knocking sound over small bumps, or lets the rear bounce after one compression is due for replacement. Replace both rears together so the ride stays consistent side to side.
- Oil seepage on the shock body
- Knocking over small bumps
- Worn or cracked eye bushings
- Excess rear bounce after one compression
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-227611 |
| UPC | 651860714424 |
| Shock series | 5160 Series |
| Size | 46mm monotube |
| Design | Monotube, gas charged |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | 0–2 in. lift |
Vehicle fitment
Fits the 2003–2018 Toyota 4Runner (Limited, SR5, Sport, TRD Off-Road, TRD Pro, Trail) and the 2007–2014 Toyota FJ Cruiser (Base, TRD Special Edition, Trail Teams Special Edition).
4Runner model years before 2003 or after 2018, and FJ Cruiser years outside 2007–2014, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm your vehicle’s lift falls within the listed 0–2 in. range before fitting. Gas charged bodies are pressurized, so avoid heat and punctures during service.
What’s included
One rear shock absorber. Check the package contents against your installation before starting.













