Overview
The Bilstein 5100 Series Shock Absorber, part number 33-225807, is a rear shock designed for lifted Jeep and SUV applications. It is a Direct Fit for the 2005 Jeep Grand Cherokee (WJ) and 2006–2010 Jeep Grand Cherokee (WK), with a lift height rating of w/0 – 1.5 in. Lift.
The 5100 Series is matched to the length a lifted vehicle needs, and its fitment and tuning are completed for each vehicle it covers. The aim is a more controlled ride than typical lifted-vehicle shocks while keeping the feel close to a stock vehicle.
Key features
- Rear position shock with a Direct Fit application
- Length suited to a lift of 0 to 1.5 in.
- Fitment and tuning completed by Bilstein for each listed vehicle
- Gas charged hydraulic design for controlled damping on lifted suspension
- Zinc plated finish
Lifted Jeep ride considerations
On a lifted Jeep, the shock works at a different angle and length than on a stock vehicle, so its movement changes. A shock sized for the lift keeps the suspension within its intended range and helps the axle stay controlled over ruts and washboard. A mismatched length can make the ride feel harsh or cause the shock to run out of travel.
Lifted Jeeps often rely more on steering stabilizers, track bars and control arm bushings, and worn parts in those areas can make a new shock feel loose. Inspect the eye mounts for play, look for oil on the body, and watch for uneven tire wear that may point to alignment changes after the lift.
Replacing shocks in pairs on the same axle keeps the Jeep stable on both sides.
- Confirm the lift range before buying
- Inspect eye mounts for play
- Check track bar and steering parts for wear
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-225807 |
| UPC | 651860714011 |
| Shock series | 5100 Series |
| Position | Rear |
| Fitment type | Direct Fit |
| Lift height | w/0 – 1.5 in. Lift |
| Collapsed length | 15.39 in. (391.0 mm) |
| Extended length | 24.76 in. (629.0 mm) |
| Hydraulic / gas charged | Gas charged |
| Finish | Zinc plated |
Vehicle fitment
Bilstein’s manufacturer fitment list covers the 2005 Jeep Grand Cherokee (WJ) in Laredo and Limited trims, and the 2006–2010 Jeep Grand Cherokee (WK) in 65th Anniversary Edition, Laredo, Limited, Overland and SRT8 trims.
The list does not include Grand Cherokee models from other generations or other model years, such as 2011 and later WK models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm that your suspension height falls within the 0 to 1.5 in. lift range before choosing this shock. Check the collapsed and extended measurements against your installed suspension before installation.
What’s included
One rear shock absorber, part number 33-225807. Check the package contents, including mounting hardware, against your installation before starting.









