Overview
The Bilstein 24-186605 is a 46mm monotube gas-charged shock absorber from the B6 series, built for drivers who want firmer, more controlled damping than a stock unit. Its single-tube body is designed to keep damping consistent as the shock heats up on long grades and rough roads.
Bilstein marks this shock as universal fit and names no specific vehicle, so match the mounting length, stroke and eye style to your application before installation.
Key features
- Monotube design aimed at steady, fade-free damping
- Digressive piston that responds to the speed of wheel travel
- Each B6 shock is tuned for its application.
- Gas-charged construction
- Intended to improve ride quality, handling and comfort
Installing a gas-charged shock
Gas-charged shocks hold nitrogen under pressure inside the body, so careful handling matters during installation. Keep the shock upright during storage, avoid dropping it on the eyes, and do not heat the body with a torch or welder. Damage to the gas chamber can change damping and cause early failure.
A monotube design uses a single tube with a floating piston separating the gas from the oil. That layout suits steady damping over long grades, though it still needs proper mounting to perform as intended. Before fitting, check the eyes and bushings for wear and make sure the shock moves freely through its range without binding.
Universal fit shocks often need the mounting hardware sorted before installing. Confirm the eye sizes, stud diameters and bushings against your vehicle, and check that the shock’s stroke allows full suspension travel without bottoming out.
- Keep the body away from heat during welding
- Check eye bushings for cracking before fitting
- Confirm clearance at full compression and extension
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186605 |
| UPC | 651860485492 |
| Shock series | B6 Series |
| Body size | 46mm monotube |
| Charge type | Gas charged |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit shock, so it is not built around one vehicle. Compare its mounting length, stroke and eye style with your current shock before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gas-charged shocks hold gas under pressure, so do not puncture, cut or heat the body during handling or mounting.
What’s included
One shock absorber under part number 24-186605 is described. No accessories are named for this part number.









