Overview
The Bilstein 24-188302 is a rear right 4600 Series monotube gas shock absorber with a 2 in. body, a yellow finish and boots included. It fits Land Rover Defender, Discovery and Range Rover vehicles from the 1970s through the 1990s.
Bilstein’s gas pressure design moves heat from the oil through the shock body. The dividing piston gives the oil room to expand as it warms, which keeps damping steadier at higher temperatures. The seamless extruded tube and separately tuned compression and rebound valving support that consistency.
Key features
- Seamless monotube body formed with a special extrusion process.
- Dividing piston that accommodates oil expansion as temperatures rise.
- Piston head with separate compression and rebound tuning.
- Digressive design with fewer parts than typical twin tube shocks.
- Heavy duty 4600 Series construction for the rear right position.
- Boots included and a 2 in. body diameter.
Choosing the right setup
Rear shocks on a solid-axle Land Rover control body movement over rough ground and help keep the tires planted when the axle articulates. Because the damping works against the springs, a shock that has lost control tends to show up as bounce after dips, nose dive under braking, or a wandering rear end on the highway.
Side matters on rear shocks more than people expect. Left and right units are separate parts, and swapping them can leave one side damping differently from the other. When replacing one side, check whether the opposite shock is the same age, since a pair with matched damping gives the most predictable handling.
- Compare eye and stud mounts before removing the old unit
- Replace worn rubber bushings at the same time
- Inspect the boot for cracks, since dirt speeds up wear
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-188302 |
| UPC | 651860449609 |
| Shock series | 4600 Series |
| Type | Monotube, gas charged |
| Body diameter | 2 in. |
| Position | Rear right |
| Reservoir | No |
| Boots included | Yes |
| Finish | Yellow |
| Fitment type | Direct fit |
| Lift height | 0 in. lift/drop. |
Vehicle fitment
The manufacturer fitment list covers the 1993 Land Rover Defender 110 (Base), the 1994–1995 and 1997 Defender 90 (Base, LE), the 1994–1995 Discovery (Base), the 1970–1974 and 1987–1994 Range Rover (40th Anniversary Edition, Base, County, County SE, Great Divide, Hunter, LSE) and the 1993 Range Rover Sport.
Discovery coverage for this part is limited to the Base trim in 1994–1995. Defender 90 model years 1996 and 1998 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock is for the rear right position only, so confirm the side before fitting. The gas charged body is pressurized, so keep heat and punctures away from it during work.
What’s included
One rear right shock absorber with boots included. Check what mounting hardware and bushings your installation needs before fitting.









