Overview
The Bilstein B8 8112 (ZoneControl CR) is a front left corner module, a gas charged coilover with position sensitive damping for light trucks and SUVs. It offers a 0.6 to 2.5 inch front lift height and a 60 mm remote reservoir for added oil capacity and cooling.
ZoneControl CR changes damping based on where the piston sits in its stroke. Three independent pistons provide 3 compression zones and 2 rebound zones, so the ride stays comfortable on everyday roads while large suspension inputs are controlled firmly. The aluminum components and zinc plated shock bodies are designed to hold up to harsh off-road conditions.
Key features
- Position sensitive damping with 3 compression zones and 2 rebound zones
- Triple piston design with 3 independent pistons
- Two-stage telescoping internal compression stop, which removes the need for an external hydraulic bump stop
- Secondary internal rebound stop that settles the suspension after a large compression event, removing the need for an external limit strap
- 60 mm remote reservoir for added oil capacity and cooling
- Chrome 5/8-inch heim joint mount with rubber sealed misalignment spacers
- Aluminum components and zinc plated shock bodies
- Factory rebuildable
Choosing a coilover module
A coilover module combines the spring and the damper into one unit, so the ride height and damping change together. Position sensitive damping adjusts resistance based on where the piston sits in its travel, which helps the suspension stay controlled through both small bumps and large compressions. A remote reservoir adds oil capacity and gives the shock more room to shed heat during hard use.
Before installing, plan the hose route to the reservoir so it clears moving parts at full travel. Look at the mounts and the heim joints for wear, and inspect the rubber spacers for cracking. Alignment is usually checked after a coilover is fitted, since changing ride height shifts front geometry.
- Plan the reservoir hose route before tightening
- Inspect heim joints and rubber spacers
- Check alignment after installation
Specifications
| Brand | Bilstein |
|---|---|
| Model | B8 8112 (ZoneControl CR) |
| UPC | 651860797984 |
| Position | Front left corner (driver side) |
| Damping | Position sensitive; 3 compression zones, 2 rebound zones |
| Pistons | 3 independent pistons |
| Reservoir | 60 mm remote reservoir |
| Mount | Chrome 5/8-inch heim joint with rubber sealed misalignment spacers |
| Front lift height | 0.6 to 2.5 inches |
| Construction | Gas charged; zinc plated shock bodies; aluminum components |
| Series | 8112 |
| Quantity | 1 per pack |
Vehicle fitment
No vehicles are identified for this module, and no specific years, models or chassis codes are given. It is a coilover for light trucks and SUVs, so confirm the application before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The remote reservoir uses the anodized bolt-on chassis mount that comes with the unit, so plan the hose route before final tightening. Because a coilover changes ride height, have the alignment checked after the module is installed.
What’s included
One module per pack, with the anodized bolt-on reservoir chassis mount.
Not included: Whether springs or other hardware are included is unclear, so check the package contents before installing.














