Overview
The Bilstein 24-009331 is a 46mm monotube gas charged rear shock absorber from the 4600 Series, finished in yellow and rated Heavy Duty. It is a direct fit part. Confirm fit for your vehicle’s year, model and trim before fitting.
The patented monotube design moves heat from the oil to the outer surface of the shock body, where it dissipates efficiently. A dividing piston lets the oil expand as heat builds, which prevents aeration, foaming and viscosity loss, so damping holds as temperatures rise. The tube is formed by a special extrusion method for very tight peak-to-valley tolerance and consistent wall thickness.
Key features
- Patented monotube gas charged construction that moves heat out through the shock body.
- Dividing piston allows the oil to expand as temperatures rise, limiting foaming and viscosity loss.
- Seamless monotube tube for tube strength.
- Piston head design allows compression and rebound damping to be tuned independently.
- Fewer parts than most conventional twin tube and road sensing designs
- Heavy Duty label with a yellow finish in the 4600 Series.
Gas charged rear shock handling
Rear shocks govern how the axle moves after a bump and during braking, and a gas charged monotube design keeps damping consistent as the oil heats. The dividing piston allows that oil to expand without foaming, which helps the shock hold its response on long grades. Because the rear end carries much of the load when a vehicle is loaded, a steady damper makes a noticeable difference.
Before fitting, measure the installed length and the mount style so the replacement matches the position of the shock it replaces. Older catalogs sometimes use different identifiers for the same shock, so compare old and current part numbers carefully. Gas charged shocks are pressurized, so have the removal done with the vehicle supported and the shock handled with care.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-009331 |
| UPC | 651860460062 |
| Shock series | 4600 Series |
| Type | Monotube, 46mm, gas charged |
| Position | Rear |
| Finish | Yellow |
| Fitment type | Direct fit |
| Lift height | 0 in (lift/drop) |
| Old part numbers | BILF4-B46-0933-H0, BILF4-B46-0933-H1 |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before fitting. Check the rear shock length and mounting points against your vehicle.
Because no vehicle is named, do not assume a match from other Bilstein 4600 Series rear shocks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gas charged shocks are pressurized, so have a shop familiar with gas shock service handle installation, and never heat or puncture the body.
What’s included
The shock absorber is the main item. Check what hardware your installation needs before starting.









