Overview
The Bilstein B6 4600 front coilover shock absorber, part number BIL24-265966, is a monotube shock for the 2016 to 2023 Toyota Tacoma. It is sold without springs, and the body has a snap ring groove so the spring seat can be located on it.
The monotube construction gives consistent, fade free performance, and the shock is tuned for each application to improve ride, handling and comfort over the original. It is a direct fit upgrade for the original shocks on stock height light trucks and SUVs.
The piston is a velocity sensitive digressive design that responds to changing road conditions. The shock is gas charged with a 46 mm body.
Key features
- Front coilover shock absorber
- Snap ring grooved body design
- 46 mm body diameter
- Monotube design with consistent performance
- Velocity sensitive digressive piston
- Gas charged construction
Spring and seat matching
A coilover shock has its spring seat located on the shock body, so the spring and shock work as one assembly. When springs are not included, the existing springs on the truck carry the load, and the seat has to sit correctly on the body for the spring to stay centered. Poor seating can cause rubbing and uneven ride height.
Before installing, inspect the old springs for sagging, cracked coils or broken seats, since a tired spring can make a new shock feel mismatched. Check that the snap ring sits fully in its groove and that the seat sits square. Replacing the front shocks together keeps the truck level and the steering consistent from side to side.
- Check the spring for sag or cracks
- Confirm the snap ring seats fully
- Replace both front shocks together
- Inspect the bump stop and mount bushings
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL24-265966 |
| Shock series | B6 4600 Series |
| Position | Front |
| Shock type | Monotube, coilover, gas charged |
| Body | Snap ring grooved, 46 mm |
| Springs | Not included |
| Fitment | Direct fit |
Vehicle fitment
It fits 2016–2023 Toyota Tacoma Limited, SR, SR5, TRD Off-Road, TRD Sport and Trail trim.
The list does not include the Tacoma from 2015 and earlier or from 2023 onward, the 4Runner, or the T100. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the springs are not included, the existing front springs are used with this coilover shock. Check that the spring seat and the snap ring match the spring on your truck before installing.
What’s included
The product is one front coilover shock absorber under part number BIL24-265966.
Not included: springs.










