Overview
The Bilstein 4600 Series front shock absorber, part number 24-186162, is a gas-charged monotube damper for the 2004–2012 Chevrolet Colorado and 2004–2012 GMC Canyon. It is a front-position unit with a 2 in body diameter, a yellow finish and boots included. Keep the front position in mind when comparing it with the rear 4600 units.
The monotube body carries heat from the oil out to the shock’s outer surface, which lets it dissipate heat more efficiently over repeated front-end travel. A dividing piston allows the oil to expand as it heats, limiting aeration and loss of viscosity so damping stays strong as temperatures rise. The tube is extruded with tight peak-to-valley tolerance and even wall thickness, and the seamless monotube adds tube strength. Confirm the front-axle position before ordering, since the 4600 Series also includes rear units under separate part numbers.
Key features
- Front-position gas-charged monotube design
- Monotube body moves oil heat toward the outer shock surface
- Dividing piston limits foaming and viscosity loss as the oil heats
- Piston head tunes compression and rebound damping independently
- Extrusion-formed tube with tight tolerance and even wall thickness
- Fewer parts than many twin-tube and road-sensing shock designs
- Boots included
After the front shock swap
A front shock affects how the steering feels at highway speed and how the nose of the truck reacts to braking. After replacement, the truck may feel firmer or more controlled, and that change is normal as the new damping settles. Drive a short route at moderate speed to check for noise, pulling, or steering wander before taking the truck on longer trips.
Front shocks wear along with the rest of the front suspension, so inspect the control arm bushings, ball joints and sway bar links while the wheels are off. Worn parts can make a new shock feel loose or produce clunks. Gas-charged monotube bodies stay pressurized, so keep them away from open flame and avoid cutting or drilling the tube.
- Check the front axle position before ordering
- Inspect control arm bushings during installation
- Recheck alignment if the steering pulls
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186162 |
| UPC | 651860592589 |
| Shock series | 4600 Series |
| Position | Front |
| Type | Monotube |
| Charge | Gas charged |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots | Included |
| Fitment type | Direct fit |
| Lift/drop | 0 in. |
Vehicle fitment
Bilstein’s manufacturer fitment list covers the 2004–2012 Chevrolet Colorado (Base, LS, LT, WT, Z71, Z71 LS, Z85, Z85 LS) and the 2004–2012 GMC Canyon (SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE).
Vehicles outside the 2004–2012 model years, including later Colorado and Canyon generations, are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Boots are included with the front shock absorber.
Not included: mounting hardware, so check the package contents before installing.









