Overview
The Bilstein 24-024785 is a 4600 Series monotube gas-charged shock absorber for the 1997–2003 Ford F-150, the 2004 Ford F-150 Heritage and the 1997–1999 Ford F-250. Each of these is a direct fit. The shock has a 2 in body diameter, a yellow finish, boots included, and no reservoir.
The monotube body carries heat from the oil outward through the tube, which helps the shock hold its damping as it warms during long use. Inside, a dividing piston lets the oil expand without aerating, and the piston head adjusts compression and rebound independently. The tube is made with a special extrusion process for tight peak-to-valley tolerance and an even wall, and the seamless construction adds tube strength. The design has fewer parts than conventional twin tube shocks.
Key features
- Monotube body in a gas charged design
- 2 in body diameter within the 4600 Series
- Dividing piston allows the oil to expand as heat builds
- Extruded tube held to tight tolerances
- Independent compression and rebound damping in the piston head
- Boots included
Matching the right shock
Gas charged monotube shocks are common on pickups because they handle loads and rough roads with fairly steady damping. Choosing one comes down to the body size, mounting position and whether a reservoir is needed, since those features decide whether the shock fits the way the truck is built. A truck that carries heavy loads or pulls a trailer will put more stress on the shock than a light-duty pickup.
Before fitting a replacement, measure the old shock’s length and compare the mounting eyes with the new unit. Worn bushings and bent brackets can make a new shock feel loose, so inspect those first. Replacing the shocks in pairs keeps the ride even side to side. If the truck pulls or the steering wobbles after a swap, recheck the mounting hardware and torque on all fasteners.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-024785 |
| UPC | 651860411835 |
| Shock series | 4600 Series |
| Shock type | Monotube, gas charged |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer list names the 1997–2003 Ford F-150 in the Base, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims, the 2004 Ford F-150 Heritage in the XL and XLT trims, and the 1997–1999 Ford F-250 in the Base, Lariat, XL and XLT trims.
Fitment covers the 1997–2003 Ford F-150 in Base, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims, the 2004 Ford F-150 Heritage in XL and XLT trims, and the 1997–1999 Ford F-250 in Base, Lariat, XL and XLT trims. Other Ford models are not covered, so confirm your year, model and trim before ordering.
What’s included
One shock absorber with boots. No reservoir is included, and no mounting hardware is described.









