Overview
The Bilstein 4600 Series Shock Absorber, part 24-185479, is a rear gas-charged monotube shock with a 2 in body diameter, yellow finish, boots included and no reservoir. Its lift/drop rating is w/0 in. Lift/Drop. It fits the 2000–2005 Ford Excursion.
Heat is a constant issue for shock damping. This design moves heat out of the oil and into the outer surface of the shock body, where it can be shed more efficiently. The dividing piston in the body accommodates oil expansion, which Bilstein says prevents foaming and viscosity loss as the oil warms.
The tube is extruded with tight peak-to-valley tolerance and steady wall thickness. The seamless monotube disperses heat well and is designed for long service life.
Key features
- Seamless monotube with a tightly held peak-to-valley tolerance
- Oil expansion handled by a dividing piston
- Piston head tuned separately for compression and rebound
- Gas-charged construction with heat dispersal through the body
- Boots included on the rear unit
- No reservoir
Rear shock care and lift
Rear shocks on a large SUV work with the springs to control rebound after a bump. Keeping rear damping consistent reduces body sway in corners and helps the tires stay planted. A shock with a seamless monotube body is built to move heat outward, which supports steady damping during repeated use.
Before fitting, compare the rear shock’s length and mounts with the unit being removed, since a mismatch can strain the bushings. A worn shock often shows leaks, uneven wear or a bounce that lasts longer than expected. Replacing the pair together keeps handling balanced. Check the boot and shaft for scoring before installation.
- Check for leaks down the body
- Inspect boots and shaft surfaces
- Replace in pairs for balanced handling
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-185479 |
| UPC | 651860608488 |
| Series | 4600 Series |
| Position | Rear |
| Type | Monotube |
| Charge | Gas charged |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots | Included |
| Lift height | w/0 in. Lift/Drop |
| Fitment type | Direct Fit |
Vehicle fitment
It fits the 2000–2005 Ford Excursion in Eddie Bauer, Limited, XLS and XLT trims. Other Ford full-size trucks and SUVs, such as the F-150 and Expedition, are not covered.
The Excursion model years covered are 2000 through 2005, so 1999 and 2006 Excursions are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the 2 in body diameter and the rear position against the shock you are removing, and keep the boots undamaged during fitting. Because the body is gas charged, heating, cutting or puncturing it is unsafe.
What’s included
Rear shock absorber with boots.









