Overview
The Bilstein 24-139175 is a rear gas-charged shock absorber from the Bilstein 4600 Series, offered as a direct-fit replacement for the 2007–2008 Dodge Nitro and the 2002–2012 Jeep Liberty (KJ). A shock absorber, also called a damper, controls how the suspension compresses and rebounds over bumps, so a worn unit can make the ride feel loose or bouncy.
The body is formed through a seamless extrusion process with tight finish tolerances, then paired with a hardened, chrome plated and polished shaft, machined valving components and high quality seals. The finished unit is built to a close standard, and it carries a limited lifetime warranty. Because this unit is for the rear position, match it to the rear axle when ordering a pair.
Key features
- Precision formed shock body made through a seamless extrusion process
- Induction hardened steel shaft with a chrome plated and polished finish
- Machined valving components for controlled damping
- High quality seals throughout the gas-charged body
- Limited lifetime warranty stated by Bilstein
Matching rear shocks as a pair
A rear shock works with the springs and axle to settle the ride after each bump. When one side has a worn damper and the other is newer, the vehicle can pull or feel uneven in corners. Replacing rear shocks in pairs keeps the damping balanced from left to right and helps the rear end track straight under braking.
Gas charged shocks are pressurized and should be handled with care. Before fitting, inspect the mounting eye, the bushings and the spring seats, since a worn mount can make a new shock rattle. Keep the body clean and free of dents, and have old units disposed of through a qualified shop.
- Replace in pairs for balance
- Check bushings and mounts
- Inspect spring seats
- Avoid heating or cutting the body
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-139175 |
| UPC | 651860582504 |
| Shock series | Bilstein 4600 Series |
| Position | Rear |
| Fitment type | Direct fit |
| Hydraulic / gas charged | Gas charged |
| Lift height | 0 in. lift/drop (stock) |
Vehicle fitment
It fits the 2007–2008 Dodge Nitro (R/T, SLT, SXT) and the 2002–2012 Jeep Liberty (KJ), including the Sport, Limited, Renegade, Rocky Mountain Edition and 65th Anniversary Edition trims. Confirm the trim before ordering, since other Liberty trims are not covered.
The list does not cover the Jeep Wrangler, the Dodge Durango, or Nitro model years outside 2007–2008. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gas-charged shocks hold pressurized gas, so do not heat, puncture or cut the body during removal or installation.
What’s included
One rear 4600 Series gas-charged shock absorber, with the body and shaft described above.
Not included: Check mounting hardware and bushing needs against your installation before starting.









