Overview
The Bilstein 4600 Series Shock Absorber, part number 24-139113, is a rear shock for the 2007–2009 Chrysler Aspen in the Limited trim and the 2004–2008 Dodge Durango in the Adventurer, Limited, SLT, ST and SXT trims. It is a monotube gas-charged unit with a 2 in. body diameter, yellow finish and boots included.
Gas-charged monotube dampers keep the oil and gas in a single tube, which gives better heat handling than a twin-tube layout. A dividing piston lets the oil expand as it warms, so the shock keeps its damping force instead of foaming. Each unit is tuned at the piston head for compression and rebound, aiming for comfort without giving up control.
If you are replacing a rear shock on an Aspen or Durango in one of the listed trims, compare the 2 in. body diameter, the rear position and the 4600 Series name against the unit you are removing. The Aspen and Durango are separate entries, so match the vehicle you own.
Key features
- Gas-charged monotube design
- Dividing piston lets oil expand under heat, as designed by Bilstein.
- Compression and rebound damping tuned independently at the piston head
- Seamless extruded tube with consistent wall thickness.
- Rear position, direct fit, 0 in. lift or drop
- Boots included, no reservoir
- Yellow finish
Rear damping for daily driving
Rear shocks on a full-size SUV carry a large share of the ride when the vehicle is loaded or towing. A worn damper can let the rear bounce after bumps, reduce stability in corners and cause the tail to sway in crosswinds. Matching the replacement to the rear axle matters because front and rear units are tuned for different loads.
When replacing rear shocks, look at the bushing condition, the spring seats and the tire wear pattern. A new shock will not feel right if the bushings are split or the spring has sagged. Replace rear shocks in pairs so both sides control the axle the same way.
- Rear end bouncing after bumps
- Sway on highway curves
- Oil seeping from the body
- Uneven rear tire wear
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-139113 |
| UPC | 651860582481 |
| Shock series | 4600 Series |
| Type | Monotube |
| Body diameter | 2 in. |
| Position | Rear |
| Hydraulic / gas charged | Gas charged |
| Fitment type | Direct fit |
| Lift height | 0 in. lift or drop |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
Vehicle fitment
It fits the 2007–2009 Chrysler Aspen in the Limited trim. It also fits the 2004–2008 Dodge Durango in the Adventurer, Limited, SLT, ST and SXT trims.
The list covers the Aspen and Durango only, with the years and trims named above. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The shock absorber, with boots.
Not included: Gather the mounting hardware your installation requires before starting.









