Overview
The Bilstein 24-187350 is a rear shock absorber from the Bilstein 4600 Series, a 46mm gas-pressure monotube built for a wide range of full-size sedans, SUVs and trucks. Bilstein describes its B6 Heavy Duty construction as improving handling and stability while keeping the ride comfortable on the street.
The shock is gas charged, with a yellow-painted steel body. Its direct fit label comes with a 0 in. lift/drop rating, but no make, model or year range is attached, so confirm the fit for your vehicle before choosing it.
Key features
- 46mm monotube body with gas pressure charging
- Heavy Duty B6 construction from the 4600 Series
- Damping suited to drivers who want firmer control
- Rear position
- Yellow paint over a steel body
Rear shock considerations
The rear shocks control body motion over bumps, under acceleration and when the vehicle carries cargo. Rear suspension designs vary widely between leaf spring and coil spring setups, so the shock’s mounting style and travel need to suit the axle it is installed on. A rear shock that is worn can cause the back of the vehicle to bounce or sway, which may affect stability on highway speeds.
Heavy duty gas pressure monotubes are often chosen for vehicles that carry extra weight. Consider the load the vehicle usually handles, since heavier loads place more stress on the shock body and mounts. Rear shocks are often replaced with related parts such as bushings, bump stops and hardware, especially if the old components show cracking or wear.
Before installing, confirm the upper and lower mounting points and check that the shock clears the body and any cargo area. Replacing both rear shocks at the same time helps the vehicle feel balanced.
- Check upper and lower mounts for wear
- Inspect rear bushings and bump stops
- Look for oil leaks along the body
- Replace both rear units together
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-187350 |
| UPC | 651860622859 |
| Shock series | 4600 Series |
| Position | Rear |
| Tube design | 46mm monotube |
| Charging | Gas charged |
| Lift/drop rating | 0 in. |
| Fitment type | Direct fit |
| Body | Steel, yellow paint |
| Former part number | BILF4-BE5-F811-H0 |
Vehicle fitment
Direct fit is the only fitment label, and no years, makes or models are attached. Verify the year, model and trim against your vehicle before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
This is one rear shock absorber. Check for mounting hardware before installation.









